1Set DIY 110V 2200W Water Cooled Spindle Motor CNC Spindle Motor 80MM 2.2KW + 13

Description

MYSWEETY 1Set DIY 110V 2200W Water Cooled Spindle Motor CNC Spindle Motor 80MM 2.2KW + 13pcs ER20 Collet + 80MM Clamp + Converter + 5M Water Pipe + 110v Water Pump+ 70mm Brush + Drill Bits
Package include: 1 x 110V 2.2KW Spindle Motor+1 x 110V 2.2KW VFD+1 x 110V 75W Water Pump+1 x 5M Water Pipes+1 x 80mm Spindle Clamp+13 x ER20 Collet+ 1 x 70mm Brush+10 x Drill Bits.
Runout off: less than 0.005mm, Speed:0-24000rpm, AC Inverters, Frequency of Inverter: 0-400Hz
13PCS ER20 Collet Set Gripping Range:(1mm,2mm,3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm,13mm)
The spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc.
100% satisfactory, if you have any problem, please contact us, we will help your money back.
1.Spindle Motor: Size: 80mm Power: 2200W Voltage: 110V Frequency: 0-400Hz Speed: 0-24000rpm Water Cooling ER20 collet Runout off: less than 0.001mm Germany SKS 4pcs bearing Bearing : 2 x 7005C P4 DT & 2 x 7002C P4 DT Grease Lubrication Power Interface: Optional GX16 waterproof air plug, there are marked 1234, 123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground 2.Inverter: : 2.2KW/110V Input: 110VAC/50Hz Output: 0-220VAC 3-phase Frequency: 0-400Hz Size: 168x124x161mm 3.ER20 Collet Set: Gripping Range: 1MM to 13MM (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm) Run-out tolerance 0.01mm (0.0006") 4.Water Pump: Voltage: 110V Structure: Single-stage Pump Pressure: High Pressure Application: Submersible Usage: Water 5.5M Water Pipes: Length: 5M Can be connected between Water Pump and Spindle Motor 6.Spindle Motor Clamp Mount: Diameter: 80mm Material: Aluminum,Surface sandblasted Application: Wood working industry rourter, such as wood door milling engraving and cutting, furniture producing Package include: 1 x 110V 2.2KW Spindle Motor 1 x 110V 2.2KW VFD 1 x 110V 75W Water Pump 1 x 5M Water Pipes 1 x 80mm Spindle Clamp (Free 3pcs screws) 13 x ER20 Collet (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)1 x 70mm Brush10 x Drill Bits How to connect: The package come with two Aviation plugs, just put the little one into the spindle, then use the large one to fix into the little one, you will see the marked number (1.2.3.4) on the top of large one, Pin 1 goes to terminal U on the vfd. Pin 2 goes to terminal V on the vfd. Pin 3 goes to terminal W on the vfd. Pin 4 is a ground/common.
SHIPPING
- We ship within 3 business days of payment, usually sooner
- We offer FREE shipping on all orders!
- We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed
International buyers
– please note: Import duties, taxes, and charges aren't included in the item price or postage cost. These charges are the buyer's responsibility.
- Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
- We have confidence in our products, but if you are not fully satisfied please contact us within 30 days of purchase and you will get full refund.