-40%
5/8"Shaft Compressor Electric Motor Duty 56Frame 2HP SPL 3450RPM 115/230 VOLT
$ 60.19
- Description
- Size Guide
Description
5/8"Shaft Compressor Electric Motor Duty 56Frame 2HP SPL 3450RPM 115/230 VOLTFeatures:
2 HP SPL 3450 RPM, 56 Frame, 120/240V, 15/7.5Amp 5/8" Shaft, Single Phase NEMA Air Compressor Electric Motor
Open dripproof Single phase Full Load amps: 15/7.5Amp, 120/240V 2 HP SPL 3450 RPM 5/8 Shaft in. NEMA
Reduced starting amperage design to ensure the reduced voltage starting at rated load.
Equipped with UL approved Manual thermal overload, capacitors and high quality ball bearings to ensure the lifetime.
Open drip-proof is better used in environment that are relatively clean and dry environments. Special design for Air Compressor duty. CCW only.
Special design for Air Compressor duty.
Motor is Non-Reversible CCW (Counter Clockwise) ONLY.
Technical Info:
Type:COMPRESSOR DUTY MOTOR
Power Source:AC
Model:2M
AC Phase:Single Phase
AC Frequency Rating:60 Hz
Base RPM:3450 RPM
Enclosure Type:ODP (Open Drip-Proof)
Full Load Amps:15
Fram Type:56
Shaft lenght:2 1/16"
capacitor:star and run
Service Factor:1.0
Rated RPM:3450
Amperage:(7.5 FLA @ 240V) (15 FLA AT 120V)
Shaft Diameter:5/8" Keyed shaft
PH:1
AMB:40
℃
/104
℉
Duty:CONT.
CODE:F
INF.CL:F
Warranty: 1 Year
PROFESSIONAL INSTALLATION IS REQUIRED.
PACKAGE LIST
1 x 2 HP SPL Compressor Duty Electric Motor
1 x Manual
Please Feel free to contact us with any questions you have relating to our products.
Kindly Tips:
Below is a quick check list for you to reference when sizing up the right motor for your application.
1. Amperage
This is your electric motors TRUE power rating. Please make sure your FL amp (FULL LOAD) rating on the motor you're replacing is within 10% of the FL Amp rating of the motor you intend to buy.
2. Frame Size
The frame not only constitutes the bolt pattern, it also depicts the overall size and torque. The larger the frame, the stronger the motor. It's extremely important that you replace it with the same frame size. Improperly sized motors will inevitably result in motor failures.
3. Phase and Voltage
If your machine requires a 230V electric motor on single phase power. You would want to incorporate a 1-phase 230V AC electric motor for your application. 230V electric motors cannot handle voltages less than 208V. They will run too hot and you will experience motor failure.
4. RPM
Matching up the RPM is quite important. The wrong speed can damage your pump. The RPM does not have to match exactly, but you do need to be the neighborhood.
Example: 3510rpm, 3550rpm, 3450rpm are all the same. They are all fall under the umbrella of whats known as 3600RPM motors.
5. Shaft Diameter
With a tape measure. Measure the outside diameter on your electric motors shaft. By matching up the proper shaft diameter, you will be able to reuse the original motor pulley that came on your machine.
☆☆☆As a professional eBay seller, we have five warehouses in the US to make fast delivery! ☆☆☆
Shipping
:
Orders made before 2:00 PM EST (11:00 AM PST) will be shipped the 24 Hrs. Most orders will be shipped within 24 hrs during weekdays via FedEx, USPS or UPS. We do not ship on weekends or various national holidays.
Important:
Please make sure your shipping address is correct before we sending your package out shortly. if you want to modify your shipping address after the package is sent out, reshipping cost plus a fee of .5 will apply.
Orders will only ship to PayPal confirmed addresses
If you want to ship to Alaska or Hawaii, please contact us. The shipping fee can be calculated upon request.
Payment
:
We accept payments only via PayPal.
Return and Warranty
:
Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. In addition, it allows customers to return new and unused products in their original factory condition for any reason within 30 days from the date of purchase.
Please note that all returns must be pre-approved by seller and have a return merchandise authorization (RMA) number. Unauthorized returns will not be accepted. Buyers are responsible for appropriate packing, returning shipping cost, insurance and returning the item in "new" condition. Returns will be charged 15% restocking fee, if the product does not have quality problems. Used items will not be accepted for return.
For most of our products we offer 3-month warranty, unless stated otherwise. Items that have been misused, abused, damaged or beyond warranty period will not be refunded or exchanged.
Contact_US
Welcome to my store☀.If you have any questions, please feel free to email our service specialists 24 Hours a Day, 7 Days a Week.We will reply you ASAP. If no response within 24 Hours, please check the spam in your mail box.
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
Our aim is to provide Top Level Customer Service, so we will try our best to solve any problem.