5HP Compressor Electric Motor 4 POLE 184T Frame ODP 1750 RPM 1 Phase 208-230V

Description

WELCOME TO OUR STORE
How to Choose the Right Motor for Your Application
5HP Compressor Electric Motor 4 POLE 184T Frame ODP 1750 RPM 1 Phase 208-230V
WELCOME TO OUR STORE
How to Choose the Right Motor for Your Application
1.Amperage. This is your electric motors TRUE power rating. Please make sure your FL amp (FULL LOAD) rating on the motor you're replacing is within 10% of the FL Amp rating of the motor you intend to buy.
2.Frame Size. The frame not only constitutes the bolt pattern, it also depicts the overall size and torque. The larger the frame, the stronger the motor. It's extremely important that you replace it with the same frame size. Improperly sized motors will inevitably result in motor failures.
3.Phase and Voltage. If your machine requires a 230V electric motor on single phase power. You would want to incorporate a 1-phase 230V AC electric motor for your application. 230V electric motors cannot handle voltages less than 208V. They will run too hot and you will experience motor failure.
4. RPM. Matching up the RPM is quite important. The wrong speed can damage your pump. The RPM does not have to match exactly, but you do need to be the neighborhood. For example: 3510rpm, 3550rpm, 3450rpm are all the same. They are all fall under the umbrella of whats known as 3600RPM motors.
5. Shaft Diameter. With a tape measure. Measure the outside diameter on your electric motors shaft. By matching up the proper shaft diameter, you will be able to reuse the original motor pulley that came on your machine.
Specification
AC Frequency Rating：60 Hz
Reversible/Non-Reversible：
Reversible
Nominal Rated Input Voltage：208V-230  V
Rated Load (HP)：5
Special Motor Construction：Spindle Motor
Current Type：AC
Shaft Diameter：1-1/8 in
Enclosure Type：ODP (Open Drip-Proof)
AC Phase：Single Phase
Insulation Class：F (Max 311°F)
Mounting Type：Base-Mounted
Pole ：4
Amps：28.5-27.0AA
AC Motor Type：Induction/Asynchronous
Base RPM：1750RPM
IP Rating：IP23
Shaft Length：2-3/4 in
Protector：Yes
Housing Material：Cast iron shell
Model：  Air Compressor
IEC Frame Size：184T
Gross Weight：110.8 lb
Net Weight : 100.53 lb
Features
Overload protector with manual reset
Base RPM:
Rotational Speed refers to the motor in rated frequency and rated voltage (or even rated load), the actual speed of the rotor rotation
CCW (Counter-Clockwise):
Represents a counter clockwise rotation
CW(Clockwise) :
Represents clockwise rotation
ODP (Open Drip-Proof):
Air is allowed to circulate in the winding, but the liquid is prevented from falling from the vertical direction to an angle of 15 degrees. Usually used for indoor applications in relatively clean, dry places
Insulation Class F:
Including a synthetic resin paint modified with silicone organic compounds for inorganic substances such as mica, asbestos and glass filament；or a synthetic resin, such as alkyd or epoxy with heat resistance meeting this requirement as a binder.The maximum permissible operating temperature is 155 ° C
Pole:
Refers to the number of magnetic poles in the excitation winding of the motor.Level 2 means that each phase of the motor contains 2 magnetic poles (one N-pole and another S-pole)
​
The Function of Motor Protectors
Comprehensive protection control for the motor, in the motor overcurrent, undercurrent, broken phase, blocking, short circuit, overvoltage, undervoltage, leakage, three-phase unbalanced, overheat, grounding, bearing wear, fixed rotor eccentric and winding aging, alarm or protection control
Package List
1 x 5HP Air Compressor Electric Motor
1 x Manual
Maintenance Measures
Clean the fuselage frequently and keep the surroundings clean
When not in use for a long time, it is necessary to apply oil or anti-rust oil storage management on the body
Often check the power control switch, power line is abnormal
Check the oil level and add lubricant to the motor regularly
Measure the voltage and current of the motor regularly
Item Specifics
UPC
Does not apply
Brand
Hi-toptools
MPN
108060-H
Rated Load (HP)
5
Current Type
AC
Nominal Rated Input Voltage
208 V
AC Phase
Single Phase
Special Motor Construction
Spindle Motor
Shaft Diameter
1 1/8 in
IEC Frame Size
184T
AC Frequency Rating
60 Hz
Reversible/Non-Reversible
Reversible
Enclosure Type
ODP (Open Drip-Proof)
Custom Bundle
No
Bundle Description
Safe
Modified Item
Yes
Modification Description
Safe
Country/Region of Manufacture
China
Payment
1.We accept PayPal only，payment system supports Mastercard, Visa, Discover, American Express and eCheck(Echeck via Paypal will be pending until it is cleared).
2. You should pay your order within 10 days of the success of a transaction. If you do not pay the order in the meantime, we will cancel the transaction and resell the product to other buyers. In addition, it will appear as an Unpaid case from eBay.
Shipping
1.We only ship to the 48 states excluding FPO or APO addresses.
2.Once your payment is completed, pls inform us by Email or leave ebay note if the changes are needed before we send the product. It is beyond our ability to change the address after we ship your item.
Returns
We ONLY accept returns with original package and will require a picture of the damaged part for verification.. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
Contact Us
we are always listening to the customers and colleagues to keep innovating our products and service. Please feel free to contact us if you have any idea or question regarding our products or service.
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
5HP Compressor Electric Motor 4 POLE 184T Frame ODP 1750 RPM 1 Phase 208-230V
WELCOME TO OUR STORE
How to Choose the Right Motor for Your Application
1.Amperage. This is your electric motors TRUE power rating. Please make sure your FL amp (FULL LOAD) rating on the motor you're replacing is within 10% of the FL Amp rating of the motor you intend to buy.
2.Frame Size. The frame not only constitutes the bolt pattern, it also depicts the overall size and torque. The larger the frame, the stronger the motor. It's extremely important that you replace it with the same frame size. Improperly sized motors will inevitably result in motor failures.
3.Phase and Voltage. If your machine requires a 230V electric motor on single phase power. You would want to incorporate a 1-phase 230V AC electric motor for your application. 230V electric motors cannot handle voltages less than 208V. They will run too hot and you will experience motor failure.
4. RPM. Matching up the RPM is quite important. The wrong speed can damage your pump. The RPM does not have to match exactly, but you do need to be the neighborhood. For example: 3510rpm, 3550rpm, 3450rpm are all the same. They are all fall under the umbrella of whats known as 3600RPM motors.
5. Shaft Diameter. With a tape measure. Measure the outside diameter on your electric motors shaft. By matching up the proper shaft diameter, you will be able to reuse the original motor pulley that came on your machine.
Specification
AC Frequency Rating：60 Hz
Reversible/Non-Reversible：
Reversible
Nominal Rated Input Voltage：208V-230  V
Rated Load (HP)：5
Special Motor Construction：Spindle Motor
Current Type：AC
Shaft Diameter：1-1/8 in
Enclosure Type：ODP (Open Drip-Proof)
AC Phase：Single Phase
Insulation Class：F (Max 311°F)
Mounting Type：Base-Mounted
Pole ：4
Amps：28.5-27.0AA
AC Motor Type：Induction/Asynchronous
Base RPM：1750RPM
IP Rating：IP23
Shaft Length：2-3/4 in
Protector：Yes
Housing Material：Cast iron shell
Model：  Air Compressor
IEC Frame Size：184T
Gross Weight：110.8 lb
Net Weight : 100.53 lb
Features
Overload protector with manual reset
Base RPM:
Rotational Speed refers to the motor in rated frequency and rated voltage (or even rated load), the actual speed of the rotor rotation
CCW (Counter-Clockwise):
Represents a counter clockwise rotation
CW(Clockwise) :
Represents clockwise rotation
ODP (Open Drip-Proof):
Air is allowed to circulate in the winding, but the liquid is prevented from falling from the vertical direction to an angle of 15 degrees. Usually used for indoor applications in relatively clean, dry places
Insulation Class F:
Including a synthetic resin paint modified with silicone organic compounds for inorganic substances such as mica, asbestos and glass filament；or a synthetic resin, such as alkyd or epoxy with heat resistance meeting this requirement as a binder.The maximum permissible operating temperature is 155 ° C
Pole:
Refers to the number of magnetic poles in the excitation winding of the motor.Level 2 means that each phase of the motor contains 2 magnetic poles (one N-pole and another S-pole)
​
The Function of Motor Protectors
Comprehensive protection control for the motor, in the motor overcurrent, undercurrent, broken phase, blocking, short circuit, overvoltage, undervoltage, leakage, three-phase unbalanced, overheat, grounding, bearing wear, fixed rotor eccentric and winding aging, alarm or protection control
Package List
1 x 5HP Air Compressor Electric Motor
1 x Manual
Maintenance Measures
Clean the fuselage frequently and keep the surroundings clean
When not in use for a long time, it is necessary to apply oil or anti-rust oil storage management on the body
Often check the power control switch, power line is abnormal
Check the oil level and add lubricant to the motor regularly
Measure the voltage and current of the motor regularly
Item Specifics
Brand :
Hi-toptools
MPN :
108060-H
Rated Load (HP) :
5
Current Type :
AC
Nominal Rated Input Voltage :
208 V
AC Phase :
Single Phase
Special Motor Construction :
Spindle Motor
Shaft Diameter :
1 1/8 in
IEC Frame Size :
184T
AC Frequency Rating :
60 Hz
Reversible/Non-Reversible :
Reversible
Enclosure Type :
ODP (Open Drip-Proof)
Custom Bundle :
No
Bundle Description :
Safe
Modified Item :
Yes
Modification Description :
Safe
Country/Region of Manufacture :
China
Payment
1.We accept PayPal only，payment system supports Mastercard, Visa, Discover, American Express and eCheck(Echeck via Paypal will be pending until it is cleared).
2. You should pay your order within 10 days of the success of a transaction. If you do not pay the order in the meantime, we will cancel the transaction and resell the product to other buyers. In addition, it will appear as an Unpaid case from eBay.
Shipping
1.We only ship to the 48 states excluding FPO or APO addresses.
2.Once your payment is completed, pls inform us by Email or leave ebay note if the changes are needed before we send the product. It is beyond our ability to change the address after we ship your item.
Returns
We ONLY accept returns with original package and will require a picture of the damaged part for verification.. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
Contact Us
we are always listening to the customers and colleagues to keep innovating our products and service. Please feel free to contact us if you have any idea or question regarding our products or service.
All rights reserved.