Air Compressor Electric Motor 3HP Single Phase 208-230 Volt 3450 RPM

Description

WELCOME TO OUR STORE
Features
Motor base installation can increase the stability of the motor
The shell material is cast iron shell suitable for installation in some places where the driving force is high or the environment is poor.
CW/CCW can be designed with general motor
The motor is counterclockwise (counterclockwise) reversible
Reduced start current design ensures reduced start voltage at rated load
Equipped with UL approved manual thermal overload, capacitors and high quality ball bearings to ensure service life
Specification
Inducts
Your Best Online Business Partner
Air Compressor Electric Motor 3HP Single Phase 208-230 Volt 3450 RPM
WELCOME TO OUR STORE
Features
Motor base installation can increase the stability of the motor
The shell material is cast iron shell suitable for installation in some places where the driving force is high or the environment is poor.
CW/CCW can be designed with general motor
The motor is counterclockwise (counterclockwise) reversible
Reduced start current design ensures reduced start voltage at rated load
Equipped with UL approved manual thermal overload, capacitors and high quality ball bearings to ensure service life
Specification
AC Frequency Rating：60 Hz
Reversible/Non-Reversible：Reversible
Nominal Rated Input Voltage：208-230 V
Rated Load (HP)：3
Special Motor Construction：Spindle Motor
Current Type：AC
Shaft Diameter：５/8 in
Enclosure Type： TEFC (Totally Enclosed Fan Cooled)
AC Phase：Single Phase
Insulation Class：F (Max 311°F)
Mounting Type：Base-Mounted
Pole :２
Amps：15.0-14.0 A
AC Motor Type：Induction/Asynchronous
Base RPM：3450RPM
IP Rating：IP55
Shaft Length：1.88in
Protector：Non
Housing Material：Rolled steel shell
Model：General Electric Motor
IEC Frame Size：56C
Reference
Amps:The current value of the replacement motor is less than 10% of what you purchased
Totally Enclosed Fan Cooling (TEFC)：Prevent the free exchange of air between the inside and outside of the frame, but do not make the frame completely airtight. The fan is mounted on the shaft and air is pushed onto the frame during operation to assist in the cooling process
RPM:Match the right or close speed, the wrong speed will damage the pump
Phase and Voltage:With the right phase and voltage that the motor cannot withstand voltage lower than itself, or the engine will overheat and fail
Frame Size:Improper motor size can cause motor failure
Note
Check whether the moving parts are flexible, the connecting parts are fastened, the lubrication system is normal, and the motor and electrical control equipment are safe and reliable
Air compressor before operation should check whether the protection device and safety accessories are in good condition
Connect water source and open inlet valve, make cooling water unimpeded
Check whether the exhaust pipe is unblocked
Check the amount of oil in the oiler, the amount of oil should not be lower than the scale value and lubricating oil in the oil pool should be within the scale range
Package List
1 x 3HPGeneral Electric Motor
1 x Manual
Item Specifics
Brand
inducts
MPN
161316-T
Rated Load (HP)
3
Current Type
AC
Nominal Rated Input Voltage
208 V
AC Phase
Single Phase
Special Motor Construction
Spindle Motor
Base RPM
3450
Shaft Diameter
5/8 in
Amps
15.0 A
AC Motor Type
Induction/Asynchronous
IEC Frame Size
56C
AC Frequency Rating
60 Hz
Pole
2
Reversible/Non-Reversible
Reversible
Payment
1.We accept PayPal only，payment system supports Mastercard, Visa, Discover, American Express and eCheck(Echeck via Paypal will be pending until it is cleared).
2. You should pay your order within 10 days of the success of a transaction. If you do not pay the order in the meantime, we will cancel the transaction and resell the product to other buyers. In addition, it will appear as an Unpaid case from eBay.
Shipping
1.We only ship to the 48 states excluding FPO or APO addresses.
2.Once your payment is completed, pls inform us by Email or leave ebay note if the changes are needed before we send the product. It is beyond our ability to change the address after we ship your item.
Returns
We ONLY accept returns with original package and will require a picture of the damaged part for verification.. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
Contact Us
we are always listening to the customers and colleagues to keep innovating our products and service. Please feel free to contact us if you have any idea or question regarding our products or service.
Inducts
Your Best Online Business Partner
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
Other
Hot Item
New List Item
Handheld Jet Fan Leaf Blower 20V Lithium Battery Cordless Electric Vacuum
USD 80.56
Direct Shipping Labels ( 4"x6", 500 packs) for Postage Address Shipping,
USD 19.99
Creality Upgraded Ender-5 Pro 3D Printer Resin Mainboard Size 220*220*300mm
USD 351.48
2-Branch 1/2” PEX Set Stainless Steel Radiant Floor Heating Manifold
USD 95.90
Label Printer, 4 x 6 inch Thermal Shipping Label Printer for Office Home Use
USD 89.59
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
Air Compressor Electric Motor 3HP Single Phase 208-230 Volt 3450 RPM
WELCOME TO OUR STORE
Features
Motor base installation can increase the stability of the motor
The shell material is cast iron shell suitable for installation in some places where the driving force is high or the environment is poor.
CW/CCW can be designed with general motor
The motor is counterclockwise (counterclockwise) reversible
Reduced start current design ensures reduced start voltage at rated load
Equipped with UL approved manual thermal overload, capacitors and high quality ball bearings to ensure service life
Specification
AC Frequency Rating：60 Hz
Reversible/Non-Reversible：Reversible
Nominal Rated Input Voltage：208-230 V
Rated Load (HP)：3
Special Motor Construction：Spindle Motor
Current Type：AC
Shaft Diameter：５/8 in
Enclosure Type： TEFC (Totally Enclosed Fan Cooled)
AC Phase：Single Phase
Insulation Class：F (Max 311°F)
Mounting Type：Base-Mounted
Pole :２
Amps：15.0-14.0 A
AC Motor Type：Induction/Asynchronous
Base RPM：3450RPM
IP Rating：IP55
Shaft Length：1.88in
Protector：Non
Housing Material：Rolled steel shell
Model：General Electric Motor
IEC Frame Size：56C
Reference
Amps:The current value of the replacement motor is less than 10% of what you purchased
Totally Enclosed Fan Cooling (TEFC)：Prevent the free exchange of air between the inside and outside of the frame, but do not make the frame completely airtight. The fan is mounted on the shaft and air is pushed onto the frame during operation to assist in the cooling process
RPM:Match the right or close speed, the wrong speed will damage the pump
Phase and Voltage:With the right phase and voltage that the motor cannot withstand voltage lower than itself, or the engine will overheat and fail
Frame Size:Improper motor size can cause motor failure
Note
Check whether the moving parts are flexible, the connecting parts are fastened, the lubrication system is normal, and the motor and electrical control equipment are safe and reliable
Air compressor before operation should check whether the protection device and safety accessories are in good condition
Connect water source and open inlet valve, make cooling water unimpeded
Check whether the exhaust pipe is unblocked
Check the amount of oil in the oiler, the amount of oil should not be lower than the scale value and lubricating oil in the oil pool should be within the scale range
Package List
1 x 3HPGeneral Electric Motor
1 x Manual
Item Specifics
Brand :
inducts
MPN :
161316-T
Rated Load (HP) :
3
Current Type :
AC
Nominal Rated Input Voltage :
208 V
AC Phase :
Single Phase
Special Motor Construction :
Spindle Motor
Base RPM :
3450
Shaft Diameter :
5/8 in
Amps :
15.0 A
AC Motor Type :
Induction/Asynchronous
IEC Frame Size :
56C
AC Frequency Rating :
60 Hz
Pole :
2
Reversible/Non-Reversible :
Reversible
Payment
1.We accept PayPal only，payment system supports Mastercard, Visa, Discover, American Express and eCheck(Echeck via Paypal will be pending until it is cleared).
2. You should pay your order within 10 days of the success of a transaction. If you do not pay the order in the meantime, we will cancel the transaction and resell the product to other buyers. In addition, it will appear as an Unpaid case from eBay.
Shipping
1.We only ship to the 48 states excluding FPO or APO addresses.
2.Once your payment is completed, pls inform us by Email or leave ebay note if the changes are needed before we send the product. It is beyond our ability to change the address after we ship your item.
Returns
We ONLY accept returns with original package and will require a picture of the damaged part for verification.. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
Contact Us
we are always listening to the customers and colleagues to keep innovating our products and service. Please feel free to contact us if you have any idea or question regarding our products or service.
All rights reserved.