CGW Spindle Storage Holder for 4-1/2", 5", 7" Resin Fiber Sanding Discs X 7/8"

Description

Introducing New
CGW
Product. Spindle Storage Holder for Resin Fiber Discs with Arbors.
Professional choice of two sizes;
diameters from 4 inches up to 6 inches (small)
diameters from 7 up to 9 inches (large).
This new, plastic made, low cost product will help professionals to store resin fibre sanding discs in a safe and ready for work proper condition.
High temperature and dryness or excessive humidity during discs storage may cause the fiber backing of discs to be deformed by temperature or absorb excessive moisture, thus may cause stored discs to curl up (convex shape like a taco shell) called cupping. Discs that are cupped or curled up are potentially unsafe and should never be used.
CGW
Spindle-spool design with tightening nut prevents moisture penetration to stored discs and provides convenient storage and keeps fiber discs flat. Keeps fibre discs away from too much moisture, or excessive dryness.
CGW
Spindle stores 50 discs of coarse grit 24 and 100 discs grits 36 and finer.
CGW
Spindle is easy to use no matter the amount of discs. There is no need to twist the red clamp if there is less than full capacity stored. All you have to do, is open the clamp, by pressing both tabs, and sliding the clamp down to whatever height needed. Twist the clamp to tighten and you are all done!
We will ship via economy ground service to confirmed address in continental US. No P.O. Box address, please. For international shipping or shipping to Hawaii, Alaska, or Puerto-Rico, please contact us for a shipping quote.
Thank you for visiting, buy with confidence
Where Quality, Performance & Value - Come Together!