Gecko G540 3 600oz Motor Kit 18/4 Shielded Cable, & Pro-Solderless Connectors

Description

Please read this entire listing to understand the gravity of this package.
This package features the most advanced G540 motor, cable, connector, resistor package available.
This is the only kit designed using DB9 EMI Ferrite filters to "Bullet Proof" your motors step, and direction signals from EMI noise penetration for maximum system stability.
The kit features the following.
3-Nema 23 600oz 3.5a 8mm dual shaft 4 lead steppers.
The motors include the required wiring diagram to make hookup simple
.
3-3.3k 1/4 watt resistors to allow the G540 to reduce current to 70% current reduction mode when the system is at idle to reduce motor heating for increased longevity.
30ft.of 18awg 4 lead shielded copper core cable to assemble three 10ft motor cables.
This cable features a shield drain wire which must be connected to a ground to drain EMI
6- total DB9 solder type connectors to build the cable ends on your included 18/4 cable.
(3 male, and 3 female DB9's are included with 6 DB9 covers)
3- Pro-solderless motor connectors to eliminate the soldering hassle, an streamline motor hookup.
3- DB9 female to male "Plug N Play" EMI Ferrite filters to protect the motors step, and direction signals from EMI penetration
Please review the overview video on this kit here
Gecko G540 Bullet Proof Complete Motor Packages!! - YouTube
Video will open in a new window
Using the eBay App? Paste link into a browser window:
[isdntekvideo]
Motor Specs are listed below, as well as listed in the pictures above.
Shipping is free in the US. International shipping is welcome with eBay's Global Shipping Program as they offer us both the best protection. Please review the Global Shipping Policy to review your shipping quote as each is based on your specific location.