High TORQUE Mini Starter For CHEVY SBC BBC 153 small block168 TOOTH 18492

Description

Starter (engine):
A starter (also self-starter, cranking motor, or starter motor) is a device used to rotate (crank) an internal-combustion engine so as to initiate the engine's operation under its own power.Starters can be electric, pneumatic, or hydraulic. In the case of very large engines, the starter can even be another internal-combustion engine.
Features:
High TORQUE Mini Starter For CHEVY SBC BBC 153 small block168 TOOTH 18492
Starter (engine):
A starter (also self-starter, cranking motor, or starter motor) is a device used to rotate (crank) an internal-combustion engine so as to initiate the engine's operation under its own power.Starters can be electric, pneumatic, or hydraulic. In the case of very large engines, the starter can even be another internal-combustion engine.
Features:
1. Easy to operate
2. Produced by the sophisticated technology
3. It is the combination of elegance and good use, firmly and securely, guaranteeing the safety of your car
4. Made of high quality material, durable and reliable in use
5. Brand new and high quality
6. An important car part
Specifications：
for Hatachi:
for S114-823, S114-823c, S114-823s, S114-823sbx,
Tooth Flywheel:
153 / 168
Voltage:
12V
Number of Teeth:
10
Power:
1.4kW / 1.88HP
Rotation:
Clockwise
Starter Type:
PMGR
Condition:
100% Brand New
Fitment：
for Chevy V8 Small/Big Block, V6, A/T or M/T with 153 or 168 Tooth Ring Gear.
for Chevrolet  AstroBase 4.3L/262CI V6 1985-2002
for Chevrolet  AstroCL 4.3L/262CI V6 1985-1995
for Chevrolet  AstroCS 4.3L/262CI V6 1985-1994
for Chevrolet  AstroLT 4.3L/262CI V6 1987-2002
for Chevrolet  Bel AirBase 7.4L/454CI V8 1970-1975
for Chevrolet  BiscayneBase 7.4L/454CI V8 1970-1972
for Chevrolet  BlazerBase 4.3L/262CI V6 1973-1999
Package Includes:
1 x  Starter
Fault check:
The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:
1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.
2. The starter thread is loose or off, and the switch or adsorption switch fails.
3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.
4. Excitation coil or armature coil is short-circuited or disconnected.
5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance
In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed
5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting
How to Install a Car Starter:
There’s never a convenient time for your vehicle’s starter to fail. A car starter's job is to kick over the engine in your car so your vehicle starts.When you find yourself with a vehicle that won’t start, there are a number of a number of issues that may be the culprit,but once you’ve narrowed it down to a faulty starter, you can replace it using just common hand tools.
Part 1: Removing a Bad Starter
(1).Disconnect the battery.
You will not need to remove the positive cable on the battery.
Always disconnect the battery before servicing the electrical system in your vehicle.
(2).Jack up the vehicle if need be.
Ensure you jack the vehicle up on firm, level ground.
(3).Locate the starter.
The smaller cylinder attached to the starter is the starter solenoid.
A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter solenoid.
(4).Disconnect the wiring to the solenoid.
In some cases, it may just be clips you need to disconnect for the wiring.
On some starters, you will need to loosen bolts or screws that hold the wires in place.
(5).Remove the starter retaining bolts then the starter.
Be sure to use the correct size socket, otherwise you risk damaging the bolts.
(6).Compare the new starter to the old one.  Slide the starter into place.
If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle.
New starter solenoids often come with four terminals, but can be used with only two.
Part 2: Installing a New Starter
(7).Insert the starter retainer bolts.
If the bolt does not thread properly, unscrew it and try again.
Make sure the bolts are tight so they can’t vibrate loose while the engine is running.
(8).Connect the wiring to the starter solenoid.
With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.
(9).Reconnect the battery.
With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle.
If the vehicle fails to start with the new starter in place, ensure the battery is fully charged.
(10).Listen to the vehicle as you attempt to start it.
As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.
(11).Ensure the battery terminals are clean and secure.Charge your vehicle’s battery.
A weak connection from the battery can prevent the engine from starting.
Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.
If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.
(12).Check to see the starter solenoid is bad.
If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery.
If the test light does light up, it means the solenoid is good, but the starter itself may have failed.
Frequently Asked Questions:
(1).Why is my car starter burning out?
You likely cranked the starter for too long.
(2).I have to change the starter fairly often in my car. What could be causing this?
A leak of some sort could be fouling the starter if fluid is dripping on it. If that's the case,
replacing the starter doesn't fix the leak so it's only a matter of time before the new starter fails.
(3).What is the black wire connected to?
He black wire can be commonly associated with the wire that connects the battery to the ignition.
If this is not the wire that you are referring to then it could be a random wire that has been detached from your fuse box?
How big is this wire? If it is rather stout then that would be your battery cables. If it is a small wire then it could be several different things.
Follow it and find the origin of the wire, it could be a simple fix just take a look at it.
(4).What does a bad starter sound like?
In my case, there was very little noise when the ignition was turned, and all that was heard was a distinctive click.
One really common sign is if you see any smoke coming from the starter.
(5).If my car is grinding when I turn the key, does that mean I have a bad starter?
No. It's your flywheel. When you start your car the grinding noise would be your flywheel that's connected to the starter.
Item Specifics
Brand
KAC
Manufacturer Part Number
ZC1STR049901
Interchange Part Number
19695 8019695
Starter Type
PMGR
Tooth Flywheel
153 168
Voltage
12V
Power
1.4kW / 1.88HP
Rotation
CW
Number of Teeth
10
Type
Starter
Notice
This is aftermarket replcement part.
Other Part Number
S114-823
Note
No Instruction Included
Color
Yellow & White
About KAC
Dedicated to building the most competitive auto lighting brand,
KAC
has built an expert technical team to work out the higher performance
LED lighting
solutions and established a long-term partnership with many high-quality suppliers in the industry who can provide us with quality parts and chips all at an extremely competitive price through the long-lasting efforts. All the cooperated suppliers are selected strictly by the expert and experienced team of KAC.
Adhering to the brand principle
---
The high-quality material creates excellent products
brand slogan
---
Light Up You More
KAC
has committed to do our utmost to serve more vehicles models with the most competitive products both in price and service, including headlights, foglights, headlight assembly, etc., aiming at the largest group of customers. Paired with our
innovative technologies, fast shipping and satisfaction guarantee, we’re able to ensure that all the customers can get the product when they need it.
Payment
1) KAC accepts all major credit cards via
PayPal,MasterCard, Visa, American Express and Discover.
2) We will only ship to the confirmed PayPal shipping address given with the payment.
3) If you want to ship to aother address, please change your PayPal shipping address before you make payment.
4) To avoid initiating an unpaid item claim, please pay
within 7 days.
Warranty & Return Policy
1) KAC offers
5 years warranty
and a
30 days free return.
Disclaimer: KAC provides a 60-Day easy return satisfaction guarantee. Items to be returned must be in original factory condition.
2) We offer a
free return & money-back guarantee
. If you are not satisfied with the product for any reason, you can return the item for refund or replacement/exchange. All returns must include the original packaging. (Please refer to our return policy for details.)
If you have any questions, please contact us via eBay message.
3) Any items damaged because of incorrect installation will not be refunded.
4) Unauthorized reselling of KAC products is strictly prohibited and we can't honor the warranty if purchasing from an unauthorized reseller.
Shipping Policy
1) We will ship items locally for US buyers. Usually, for US buyers it will take
about 5-7 business days
to reach. If you don't get it, please contact us firstly, we'll try our best to support you.
2) For US customers, all items will be shipped out
within 1-2 business
days with cleared payment. Please include your phone number in the payment note for prompt and secure shipment.
3) Tracking numbers for all orders are added to eBay once they have been dispatched; please log in to eBay to find the tracking information for your order.
Contact Us
If you have ANY questions with shipping, product or service, please Contact Us first before leaving feedback/writing a review or filing a return case. We will solve the problem!
We always put our customers first and your satisfaction is guaranteed.
Our KAC Tech are here to serve you. Email us and our expert team will swiftly diagnose the issue and offer the best solution within 12-24 business hours. All off-hours emails will be answered
within 24-48 hours.
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Picture
Text Link
Hot Item
XL For 99-06 GMC Sierra Yukon Headlights Bumper Assembly Turn Signal OE Style
USD 77.99
Headlights Clean Lens Lamps For 2008-2014 Chevy Silverado 1500 2500 3500 2PC USA
USD 114.99
Ignition Coil Pack for Ford E150 E250 Freestar Mustang/Mazda/Mercury V6 4.2 3.0L
USD 42.57
Water Pump For 95-09 GMC Chevrolet Oldsmobile Pontiac Buick 3.8L AW5075 Durable
USD 35.99
Black Adult Motocross Helmet Motorcross ATV Racing Matt Protective 63-64CM XXL
USD 52.99
High TORQUE Mini Starter For CHEVY SBC BBC 153 small block168 TOOTH 18492
Starter (engine):
A starter (also self-starter, cranking motor, or starter motor) is a device used to rotate (crank) an internal-combustion engine so as to initiate the engine's operation under its own power.Starters can be electric, pneumatic, or hydraulic. In the case of very large engines, the starter can even be another internal-combustion engine.
Features:
1. Easy to operate
2. Produced by the sophisticated technology
3. It is the combination of elegance and good use, firmly and securely, guaranteeing the safety of your car
4. Made of high quality material, durable and reliable in use
5. Brand new and high quality
6. An important car part
Specifications：
for Hatachi:
for S114-823, S114-823c, S114-823s, S114-823sbx,
Tooth Flywheel:
153 / 168
Voltage:
12V
Number of Teeth:
10
Power:
1.4kW / 1.88HP
Rotation:
Clockwise
Starter Type:
PMGR
Condition:
100% Brand New
Fitment：
for Chevy V8 Small/Big Block, V6, A/T or M/T with 153 or 168 Tooth Ring Gear.
for Chevrolet  AstroBase 4.3L/262CI V6 1985-2002
for Chevrolet  AstroCL 4.3L/262CI V6 1985-1995
for Chevrolet  AstroCS 4.3L/262CI V6 1985-1994
for Chevrolet  AstroLT 4.3L/262CI V6 1987-2002
for Chevrolet  Bel AirBase 7.4L/454CI V8 1970-1975
for Chevrolet  BiscayneBase 7.4L/454CI V8 1970-1972
for Chevrolet  BlazerBase 4.3L/262CI V6 1973-1999
Package Includes:
1 x  Starter
Fault check:
The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:
1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.
2. The starter thread is loose or off, and the switch or adsorption switch fails.
3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.
4. Excitation coil or armature coil is short-circuited or disconnected.
5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance
In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed
5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting
How to Install a Car Starter:
There’s never a convenient time for your vehicle’s starter to fail. A car starter's job is to kick over the engine in your car so your vehicle starts.When you find yourself with a vehicle that won’t start, there are a number of a number of issues that may be the culprit,but once you’ve narrowed it down to a faulty starter, you can replace it using just common hand tools.
Part 1: Removing a Bad Starter
(1).Disconnect the battery.
You will not need to remove the positive cable on the battery.
Always disconnect the battery before servicing the electrical system in your vehicle.
(2).Jack up the vehicle if need be.
Ensure you jack the vehicle up on firm, level ground.
(3).Locate the starter.
The smaller cylinder attached to the starter is the starter solenoid.
A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter solenoid.
(4).Disconnect the wiring to the solenoid.
In some cases, it may just be clips you need to disconnect for the wiring.
On some starters, you will need to loosen bolts or screws that hold the wires in place.
(5).Remove the starter retaining bolts then the starter.
Be sure to use the correct size socket, otherwise you risk damaging the bolts.
(6).Compare the new starter to the old one.  Slide the starter into place.
If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle.
New starter solenoids often come with four terminals, but can be used with only two.
Part 2: Installing a New Starter
(7).Insert the starter retainer bolts.
If the bolt does not thread properly, unscrew it and try again.
Make sure the bolts are tight so they can’t vibrate loose while the engine is running.
(8).Connect the wiring to the starter solenoid.
With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.
(9).Reconnect the battery.
With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle.
If the vehicle fails to start with the new starter in place, ensure the battery is fully charged.
(10).Listen to the vehicle as you attempt to start it.
As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.
(11).Ensure the battery terminals are clean and secure.Charge your vehicle’s battery.
A weak connection from the battery can prevent the engine from starting.
Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.
If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.
(12).Check to see the starter solenoid is bad.
If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery.
If the test light does light up, it means the solenoid is good, but the starter itself may have failed.
Frequently Asked Questions:
(1).Why is my car starter burning out?
You likely cranked the starter for too long.
(2).I have to change the starter fairly often in my car. What could be causing this?
A leak of some sort could be fouling the starter if fluid is dripping on it. If that's the case,
replacing the starter doesn't fix the leak so it's only a matter of time before the new starter fails.
(3).What is the black wire connected to?
He black wire can be commonly associated with the wire that connects the battery to the ignition.
If this is not the wire that you are referring to then it could be a random wire that has been detached from your fuse box?
How big is this wire? If it is rather stout then that would be your battery cables. If it is a small wire then it could be several different things.
Follow it and find the origin of the wire, it could be a simple fix just take a look at it.
(4).What does a bad starter sound like?
In my case, there was very little noise when the ignition was turned, and all that was heard was a distinctive click.
One really common sign is if you see any smoke coming from the starter.
(5).If my car is grinding when I turn the key, does that mean I have a bad starter?
No. It's your flywheel. When you start your car the grinding noise would be your flywheel that's connected to the starter.
Item Specifics
Brand :
KAC
Manufacturer Part Number :
ZC1STR049901
Interchange Part Number :
19695 8019695
Starter Type :
PMGR
Tooth Flywheel :
153 168
Voltage :
12V
Power :
1.4kW / 1.88HP
Rotation :
CW
Number of Teeth :
10
Type :
Starter
Notice :
This is aftermarket replcement part.
Other Part Number :
S114-823
Note :
No Instruction Included
Color :
Yellow & White
About KAC
Payment
Warranty & Return Policy
Shipping Policy
Contact Us
Dedicated to building the most competitive auto lighting brand,
KAC
has built an expert technical team to work out the higher performance
LED lighting
solutions and established a long-term partnership with many high-quality suppliers in the industry who can provide us with quality parts and chips all at an extremely competitive price through the long-lasting efforts. All the cooperated suppliers are selected strictly by the expert and experienced team of KAC.
Adhering to the brand principle
---
The high-quality material creates excellent products
brand slogan
---
Light Up You More
KAC
has committed to do our utmost to serve more vehicles models with the most competitive products both in price and service, including headlights, foglights, headlight assembly, etc., aiming at the largest group of customers. Paired with our
innovative technologies, fast shipping and satisfaction guarantee, we’re able to ensure that all the customers can get the product when they need it.
1) KAC accepts all major credit cards via
PayPal,MasterCard, Visa, American Express and Discover.
2) We will only ship to the confirmed PayPal shipping address given with the payment.
3) If you want to ship to aother address, please change your PayPal shipping address before you make payment.
4) To avoid initiating an unpaid item claim, please pay
within 7 days.
1) KAC offers
5 years warranty
and a
30 days free return.
Disclaimer: KAC provides a 60-Day easy return satisfaction guarantee. Items to be returned must be in original factory condition.
2) We offer a
free return & money-back guarantee
. If you are not satisfied with the product for any reason, you can return the item for refund or replacement/exchange. All returns must include the original packaging. (Please refer to our return policy for details.)
If you have any questions, please contact us via eBay message.
3) Any items damaged because of incorrect installation will not be refunded.
4) Unauthorized reselling of KAC products is strictly prohibited and we can't honor the warranty if purchasing from an unauthorized reseller.
1) We will ship items locally for US buyers. Usually, for US buyers it will take
about 5-7 business days
to reach. If you don't get it, please contact us firstly, we'll try our best to support you.
2) For US customers, all items will be shipped out
within 1-2 business
days with cleared payment. Please include your phone number in the payment note for prompt and secure shipment.
3) Tracking numbers for all orders are added to eBay once they have been dispatched; please log in to eBay to find the tracking information for your order.
If you have ANY questions with shipping, product or service, please Contact Us first before leaving feedback/writing a review or filing a return case. We will solve the problem!
We always put our customers first and your satisfaction is guaranteed.
Our KAC Tech are here to serve you. Email us and our expert team will swiftly diagnose the issue and offer the best solution within 12-24 business hours. All off-hours emails will be answered
within 24-48 hours.
All rights reserved.
On Sep 8, 2022 at 20:52:12 PDT, seller added the following information: