-40%
High Torque Starter For Chevrolet LS1 LS2 LS3 LS6 LS7 Vortec 5.3L High Output
$ 32.73
- Description
- Size Guide
Description
High Torque Starter For Chevrolet LS1 LS2 LS3 LS6 LS7 Vortec 5.3L High OutputFitment Information:
High Torque High Output Chevrolet LS Performance Racing Starter
High Torque Starter Fits Chevrolet LS1, LS2, LS3, LS6, LS7, Vortec 5.3
Performance Racing High Torque Starter for your LS Engine
Specifications:
Brand New and Warranty offered
Unit Type: Starter
1 Year Warranty
This item is backed by a 1 Year Warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge (excludes shipping charges) for the original purchaser.
Please note: Any modifications to an item of any kind before contacting us will void any and all warranty coverage for this item. Please contact us before modifying the part so that we have the opportunity to correct the situation.
Tips:
1. In the process of disassembly and assembly, avoid hitting the starter with hammers, wrenches and other tools to avoid damage to parts.
2. The disassembly and assembly of the starter must be carried out in accordance with the prescribed steps (the disassembly and assembly sequence of different types of starters are different, and should be carried out in accordance with the operating sequence specified by the manufacturer), especially the parts or assemblies that cannot be disassembled according to the disassembly operation. Do not disassemble arbitrarily (such as electromagnetic switch, stator core and winding).
3. When disassembling, carefully analyze the structure of the starter, the function of the components, the working principle, the assembly relationship and the connection of the circuit according to the requirements.
4.The disassembled parts should be arranged in order to avoid errors or omissions during assembly.
5.When assembling, each bolt should be tightened according to the specified torque. Check and adjust the gap of each part.
Notes:
1. When starting the engine, each turn-on time shall not exceed 5s. If continuous starting should be separated by 10-15s, the engine failure should be eliminated if the engine fails to start after three consecutive starts.
2. After confirming that the engine is not faulty, start again after an interval of 5 minutes, otherwise the heat generated by the starter due to the excessive starting current will not be dissipated, and the rotor and stator coils of the starter will be burnt.
3. When using the starter, it is necessary to keep all parts of the starter clean and dry, the connection is firm, the brush and the commutator are in good contact, and the maintenance should be checked and maintained regularly in accordance with the regulations of the car maintenance system. Mainly check the sliding bearing clearance at both ends of the starter, the one-way torque of the gear one-way device and the wear condition of the electric brush.
How to Install a Car Starter:
There’s never a convenient time for your vehicle’s starter to fail. A car starter's job is to kick over the engine in your car so your vehicle starts.When you find yourself with a vehicle that won’t start, there are a number of a number of issues that may be the culprit,but once you’ve narrowed it down to a faulty starter, you can replace it using just common hand tools.
Part 1: Removing a Bad Starter
(1).Disconnect the battery.
You will not need to remove the positive cable on the battery.
Always disconnect the battery before servicing the electrical system in your vehicle.
(2).Jack up the vehicle if need be.
Ensure you jack the vehicle up on firm, level ground.
(3).Locate the starter.
The smaller cylinder attached to the starter is the starter solenoid.
A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter solenoid.
(4).Disconnect the wiring to the solenoid.
In some cases, it may just be clips you need to disconnect for the wiring.
On some starters, you will need to loosen bolts or screws that hold the wires in place.
(5).Remove the starter retaining bolts then the starter.
Be sure to use the correct size socket, otherwise you risk damaging the bolts.
(6).Compare the new starter to the old one.
Slide the starter into place.
If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle.
New starter solenoids often come with four terminals, but can be used with only two.
Part 2: Installing a New Starter
(7).Insert the starter retainer bolts.
If the bolt does not thread properly, unscrew it and try again.
Make sure the bolts are tight so they can’t vibrate loose while the engine is running.
(8).Connect the wiring to the starter solenoid.
With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.
(9).Reconnect the battery.
With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle.
If the vehicle fails to start with the new starter in place, ensure the battery is fully charged.
(10).Listen to the vehicle as you attempt to start it.
As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.
(11).Ensure the battery terminals are clean and secure.
Charge your vehicle’s battery.
A weak connection from the battery can prevent the engine from starting.
Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.
If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.
(12).Check to see the starter solenoid is bad.
If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery.
If the test light does light up, it means the solenoid is good, but the starter itself may have failed.
Frequently Asked Questions:
(1).Why is my car starter burning out?
You likely cranked the starter for too long.
(2)
.I have to change the starter fairly often in my car. What could be causing this?
A leak of some sort could be fouling the starter if fluid is dripping on it. If that's the case,
replacing the starter doesn't fix the leak so it's only a matter of time before the new starter fails.
(3)
.What is the black wire connected to?
He black wire can be commonly associated with the wire that connects the battery to the ignition.
If this is not the wire that you are referring to then it could be a random wire that has been detached from your fuse box?
How big is this wire? If it is rather stout then that would be your battery cables. If it is a small wire then it could be several different things.
Follow it and find the origin of the wire, it could be a simple fix just take a look at it.
(4)
.What does a bad starter sound like?
In my case, there was very little noise when the ignition was turned, and all that was heard was a distinctive click.
One really common sign is if you see any smoke coming from the starter.
(5)
.If my car is grinding when I turn the key, does that mean I have a bad starter?
No. It's your flywheel. When you start your car the grinding noise would be your flywheel that's connected to the starter.
Warranty & Return Policy
Payment
Shipping Policy
Contact Us
About KAC
Warranty & Return Policy
1) KAC offers 5 years warranty and a 60 days free return.
Disclaimer: KAC provides a 60-Day easy return satisfaction guarantee. Items to be returned must be in original factory condition.
2) We offer a free return & money-back guarantee. If you are not satisfied with the product for any reason, you can return the item for refund or replacement/exchange. All returns must include the original packaging. (Please refer to our return policy for details.)If you have any questions, please contact us via eBay message.
3) Any items damaged because of incorrect installation will not be refunded.
4) Unauthorized reselling of KAC products is strictly prohibited and we can't honor the warranty if purchasing from an unauthorized reseller.
Payment
1) KAC accepts all major credit cards via PayPal: MasterCard, Visa, American Express and Discover.
2) We will only ship to the confirmed PayPal shipping address given with the payment.
3) If you want to ship to aother address, please change your PayPal shipping address before you make payment.
4) To avoid initiating an unpaid item claim, please pay within 7 days.
Shipping Policy
1) We will ship items locally for US buyers. Usually, for US buyers it will take about 5-7 business days to reach. If you don't get it, please contact us firstly, we'll try our best to support you.
2) For US customers, all items will be shipped out within 1-2 business days with cleared payment. Please include your phone number in the payment note for prompt and secure shipment.
3) Tracking numbers for all orders are added to eBay once they have been dispatched; please log in to eBay to find
the tracking information for your order.
Contact Us
If you have ANY questions with shipping, product or service, please Contact Us first before leaving feedback/writing a review or filing a return case. We will solve the problem!
We always put our customers first and your satisfaction is guaranteed.
Our KAC Tech are here to serve you. Email us and our expert team will swiftly diagnose the issue and offer the best solution within 12-24 business hours. All off-hours emails will be answered within 24-48 hours
About KAC
Dedicated to building the most competitive auto lighting brand, KAC has built an expert technical team to work out the higher performance LED lighting solutions and established a long-term partnership with many high-quality suppliers in the industry who can provide us with quality parts and chips all at an extremely competitive price through the long-lasting efforts. All the cooperated suppliers are selected strictly by the expert and experienced team of KAC.
Adhering to the brand principle ---The high-quality material creates excellent products and the brand slogan---Light Up You
More, KAC has committed to do our utmost to serve more vehicles models with the most competitive products both in price and service, including headlights, foglights, headlight assembly, etc., aiming at the largest group of customers. Paired with our innovative technologies, fast shipping and satisfaction guarantee, we’re able to ensure that all the customers can get the product when they need it
On Sep 16, 2022 at 00:22:08 PDT, seller added the following information: