HIGH-TORQUE STARTER 3247 For Ford F-SERIES 1997 BB 7.5L 460 CID w/ AT TRUCK CW

Description

Features:
Part # 3247
OEM: Ford
Part Type : Starter
Teeth : 10
Kilowatts : 1.5
Voltage : 12
Rotation : CW
Note : PMGR
Part Number:
Bosch SR7526X
Delco 10465368
Ford F2TU11000BA, F2TZ11002B, SA794,F7PU-GA
Lucas S2945
Fitment:
Ford F-SERIES PICKUPS 7.5L(460) V8 1997
​
Tech Notes
FORD F-SERIES PICKUPS 1997
NOTE: D.E. HOUSING #F2TU-11131-BA
NOTE: TOP MOUNTING HOLE 3/8-16, BOTTOM HOLE 10mm
Speed_autoparts_led
Best choice of motor parts
HIGH-TORQUE STARTER 3247 For Ford F-SERIES 1997 BB 7.5L 460 CID w/ AT TRUCK CW
Features:
Part # 3247
OEM: Ford
Part Type : Starter
Teeth : 10
Kilowatts : 1.5
Voltage : 12
Rotation : CW
Note : PMGR
Part Number:
Bosch
SR7526X
Delco
10465368
Ford
F2TU11000BA, F2TZ11002B, SA794,F7PU-GA
Lucas
S2945
Fitment:
Ford F-SERIES PICKUPS 7.5L(460) V8 1997
​
Tech Notes
FORD F-SERIES PICKUPS 1997
NOTE: D.E. HOUSING #F2TU-11131-BA
NOTE: TOP MOUNTING HOLE 3/8-16, BOTTOM HOLE 10mm
NOTE: THIS IS THE LATER VERSION OF 150-325 WITH A M6 X 1.0 THREADED STUD (LH) INSTEAD OF SPADE TERMINAL (LH).
​
Package Including:
1 X Starter
​
Fault check:
The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:
1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.
2. The starter thread is loose or off, and the switch or adsorption switch fails.
3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.
4. Excitation coil or armature coil is short-circuited or disconnected.
5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance
In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed
5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting.
How to Install a Car Starter:
There’s never a convenient time for your vehicle’s starter to fail. A car starter's job is to kick over the engine in your car so your vehicle starts.When you find yourself with a vehicle that won’t start, there are a number of a number of issues that may be the culprit,but once you’ve narrowed it down to a faulty starter, you can replace it using just common hand tools.
Part 1: Removing a Bad Starter
(1).Disconnect the battery.
You will not need to remove the positive cable on the battery.
Always disconnect the battery before servicing the electrical system in your vehicle.
(2).Jack up the vehicle if need be.
Ensure you jack the vehicle up on firm, level ground.
(3).Locate the starter.
The smaller cylinder attached to the starter is the starter solenoid.
A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter solenoid.
(4).Disconnect the wiring to the solenoid.
In some cases, it may just be clips you need to disconnect for the wiring.
On some starters, you will need to loosen bolts or screws that hold the wires in place.
(5).Remove the starter retaining bolts then the starter.
Be sure to use the correct size socket, otherwise you risk damaging the bolts.
(6).Compare the new starter to the old one.  Slide the starter into place.
If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle.
New starter solenoids often come with four terminals, but can be used with only two.
Part 2: Installing a New Starter
(7).Insert the starter retainer bolts.
If the bolt does not thread properly, unscrew it and try again.
Make sure the bolts are tight so they can’t vibrate loose while the engine is running.
(8).Connect the wiring to the starter solenoid.
With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.
(9).Reconnect the battery.
With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle.
If the vehicle fails to start with the new starter in place, ensure the battery is fully charged.
(10).Listen to the vehicle as you attempt to start it.
As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.
(11).Ensure the battery terminals are clean and secure.Charge your vehicle’s battery.
A weak connection from the battery can prevent the engine from starting.
Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.
If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.
(12).Check to see the starter solenoid is bad.
If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery.
If the test light does light up, it means the solenoid is good, but the starter itself may have failed.
Frequently Asked Questions:
(1).Why is my car starter burning out?
You likely cranked the starter for too long.
(2).I have to change the starter fairly often in my car. What could be causing this?
A leak of some sort could be fouling the starter if fluid is dripping on it. If that's the case,
replacing the starter doesn't fix the leak so it's only a matter of time before the new starter fails.
(3).What is the black wire connected to?
He black wire can be commonly associated with the wire that connects the battery to the ignition.
If this is not the wire that you are referring to then it could be a random wire that has been detached from your fuse box?
How big is this wire? If it is rather stout then that would be your battery cables. If it is a small wire then it could be several different things.
Follow it and find the origin of the wire, it could be a simple fix just take a look at it.
(4).What does a bad starter sound like?
In my case, there was very little noise when the ignition was turned, and all that was heard was a distinctive click.
One really common sign is if you see any smoke coming from the starter.
(5).If my car is grinding when I turn the key, does that mean I have a bad starter?
No. It's your flywheel. When you start your car the grinding noise would be your flywheel that's connected to the starter.
Item Specifics
Condition
New
Manufacturer Warranty
Lifetime
OE/OEM Part Number
F2TZ11002B
Voltage
12 V
Number of Holes
2
Vintage Part
No
Interchange Part Number
F2TU-11000-BA F2TZ-11002-B F2TU-BA 336-1168
Power Rating
1.5 kW
Placement on Vehicle
Front
Manufacturer Part Number
SPD641174
Brand
KAC
Type
Starter Motor
Number of Teeth
10
UPC
997750641174
Features
Clockwise Rotation
MPN
SPD641174
Payment
1. We accept payment via PAYPAL only.
2. eCHECK from PayPal will only be processed once the payment clears.
3. Payment must be made within 4 days of auction closing.
4. Total amount due includes the final auction price plus Shipping & Handling.
5. Shipping & Handling will be determined based upon the SHIP TO address.
Shipping
1. Order will be usually shipped out the same or next business days once the payment is made and cleared.
2. Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
3.If you have not received your shipment within 30 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
4.Shipping charges do not include custom & brokerage fees, buyers responsible for all custom and brokerage fees.
Returns
If you send email to us,In our working hours will be resumed within 24 hours.
Please feel free to contact us if you have any questions:
Dear my friend,we appreciate your support.And our goal is service you well and give you a pleasant shopping time in our store.
1.Not receive in time;
2.Item broken;
3.Not satisfied with the item.
we will try our best to handle it well within 24hours,except International Holiday.
Contact Us
We carry the most complete LED replacement bulb collection for any cars, SUVs and trucks. We also provide wide selections of Auto parts
Customer Satisfactory
1.Do not hesitate to contact us any time before and after your purchase, we are committed to your 100% customer satisfaction.
2. We back our commitment with superb service & customer satisfaction guarantee.
3. We are here and ready to assist you with any questions or concerns you might have before or after the purchase.
4. Our goal is to make sure you are a happy customer and pleasant shopping with us.
Feedback
If you have ANY questions with shipping, product or service, please Contact Us first before leaving feedback/write a review or filing a return case. We will solve the problem!If you have ANY questions with shipping, product or service, please Contact Us first before leaving feedback/write a review or filing a return case. We will solve the problem!We always put our customers first and your satisfaction is guaranteed.
Our speed_autolight Tech's are here to serve you. Email us and our expert team will swiftly diagnose the issue and offer the best solution within 12-24 business hours. All off-hours emails will be answered within 24-48 hours.
Speed_autoparts_led
Best choice of motor parts
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
Head Light
Fog Light
LED Bulbs
Edison Bulbs
Front Bumper
Side Steps
Air Filter
Shock Absorber
Air Diesel Heater
Tire Pressure Sensor
Headlight Assemblies
Other Car Accessory
Air compressor & clutch
Starter
Alternator
Power Window Regulator
Fan Clutch
AC Condense & Radiator
Helmet
Ignition Coils
Throttle Body
Radiator Cooling Fan
Floor Mats
Go Kart Clutch
Carburetor
Rear View Mirrors
Expansion Tank
Power Steering Pump
Other
Hot Item
Starter Motor For Kohler John Deere 2409801 2509808 2509809 2509811 UTV Mowers
USD 59.99
New Starter for Chevy GMC Silverado Sierra V8 4.8L & 5.3L 1999-2003 6489 SDR0070
USD 82.62
Starter For Honda Accord 2008-2012 CR-V 2007-2011 Element 2009-2011 2.4L 17954
USD 73.25
STARTER MOTOR FOR MAZDA 3 2.3L 2004-2009 MAZDA 6 2.3L 06-07 MAZDA 5 2.3L 06-09
USD 699.00
New Starter for BMW 128 135 323 325 328 330 335 525 530 535 X3 X5 X6 Z4 17922
USD 899.00
Warranty
New List Item
Starter 17775 For Mitsubishi Montero 2003-2006 Montero Sport 1999 2000 2001-2004
USD 58.99
Starter 17994 For Dodge Caliber 07-12 Avenger 08-10 Jeep Compass Patriot 07-17
USD 57.99
High Torque Starter Motor For Chevy LS1 LS2 LS3 LS6 LS7 Vortec 5.3L High Output
USD 61.99
Starter For Mercedes-Benz CL CLK E G M S SL SLK Class 98-09 17757 112-151-00-80
USD 63.99
New Starter 16966 For Suzuki SJ413 1985 Samurai 1985-1995 Sidekick 1989 1.3L US
USD 68.99
Excellent Delivery
HIGH-TORQUE STARTER 3247 For Ford F-SERIES 1997 BB 7.5L 460 CID w/ AT TRUCK CW
Features:
Part # 3247
OEM: Ford
Part Type : Starter
Teeth : 10
Kilowatts : 1.5
Voltage : 12
Rotation : CW
Note : PMGR
Part Number:
Bosch
SR7526X
Delco
10465368
Ford
F2TU11000BA, F2TZ11002B, SA794,F7PU-GA
Lucas
S2945
Fitment:
Ford F-SERIES PICKUPS 7.5L(460) V8 1997
​
Tech Notes
FORD F-SERIES PICKUPS 1997
NOTE: D.E. HOUSING #F2TU-11131-BA
NOTE: TOP MOUNTING HOLE 3/8-16, BOTTOM HOLE 10mm
NOTE: THIS IS THE LATER VERSION OF 150-325 WITH A M6 X 1.0 THREADED STUD (LH) INSTEAD OF SPADE TERMINAL (LH).
​
Package Including:
1 X Starter
​
Fault check:
The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:
1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.
2. The starter thread is loose or off, and the switch or adsorption switch fails.
3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.
4. Excitation coil or armature coil is short-circuited or disconnected.
5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance
In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed
5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting.
How to Install a Car Starter:
There’s never a convenient time for your vehicle’s starter to fail. A car starter's job is to kick over the engine in your car so your vehicle starts.When you find yourself with a vehicle that won’t start, there are a number of a number of issues that may be the culprit,but once you’ve narrowed it down to a faulty starter, you can replace it using just common hand tools.
Part 1: Removing a Bad Starter
(1).Disconnect the battery.
You will not need to remove the positive cable on the battery.
Always disconnect the battery before servicing the electrical system in your vehicle.
(2).Jack up the vehicle if need be.
Ensure you jack the vehicle up on firm, level ground.
(3).Locate the starter.
The smaller cylinder attached to the starter is the starter solenoid.
A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter solenoid.
(4).Disconnect the wiring to the solenoid.
In some cases, it may just be clips you need to disconnect for the wiring.
On some starters, you will need to loosen bolts or screws that hold the wires in place.
(5).Remove the starter retaining bolts then the starter.
Be sure to use the correct size socket, otherwise you risk damaging the bolts.
(6).Compare the new starter to the old one.  Slide the starter into place.
If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle.
New starter solenoids often come with four terminals, but can be used with only two.
Part 2: Installing a New Starter
(7).Insert the starter retainer bolts.
If the bolt does not thread properly, unscrew it and try again.
Make sure the bolts are tight so they can’t vibrate loose while the engine is running.
(8).Connect the wiring to the starter solenoid.
With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.
(9).Reconnect the battery.
With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle.
If the vehicle fails to start with the new starter in place, ensure the battery is fully charged.
(10).Listen to the vehicle as you attempt to start it.
As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.
(11).Ensure the battery terminals are clean and secure.Charge your vehicle’s battery.
A weak connection from the battery can prevent the engine from starting.
Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.
If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.
(12).Check to see the starter solenoid is bad.
If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery.
If the test light does light up, it means the solenoid is good, but the starter itself may have failed.
Frequently Asked Questions:
(1).Why is my car starter burning out?
You likely cranked the starter for too long.
(2).I have to change the starter fairly often in my car. What could be causing this?
A leak of some sort could be fouling the starter if fluid is dripping on it. If that's the case,
replacing the starter doesn't fix the leak so it's only a matter of time before the new starter fails.
(3).What is the black wire connected to?
He black wire can be commonly associated with the wire that connects the battery to the ignition.
If this is not the wire that you are referring to then it could be a random wire that has been detached from your fuse box?
How big is this wire? If it is rather stout then that would be your battery cables. If it is a small wire then it could be several different things.
Follow it and find the origin of the wire, it could be a simple fix just take a look at it.
(4).What does a bad starter sound like?
In my case, there was very little noise when the ignition was turned, and all that was heard was a distinctive click.
One really common sign is if you see any smoke coming from the starter.
(5).If my car is grinding when I turn the key, does that mean I have a bad starter?
No. It's your flywheel. When you start your car the grinding noise would be your flywheel that's connected to the starter.
Item Specifics
Condition
New
Manufacturer Warranty
Lifetime
OE/OEM Part Number
F2TZ11002B
Voltage
12 V
Number of Holes
2
Vintage Part
No
Interchange Part Number
F2TU-11000-BA F2TZ-11002-B F2TU-BA 336-1168
Power Rating
1.5 kW
Placement on Vehicle
Front
Manufacturer Part Number
SPD641174
Brand
KAC
Type
Starter Motor
Number of Teeth
10
UPC
997750641174
Features
Clockwise Rotation
MPN
SPD641174
Item Specifics
Condition :
New
Manufacturer Warranty :
Lifetime
OE/OEM Part Number :
F2TZ11002B
Voltage :
12 V
Number of Holes :
2
Vintage Part :
No
Interchange Part Number :
F2TU-11000-BA F2TZ-11002-B F2TU-BA 336-1168
Power Rating :
1.5 kW
Placement on Vehicle :
Front
Manufacturer Part Number :
SPD641174
Brand :
KAC
Type :
Starter Motor
Number of Teeth :
10
UPC :
997750641174
Features :
Clockwise Rotation
MPN :
SPD641174
Payment
1. We accept payment via PAYPAL only.
2. eCHECK from PayPal will only be processed once the payment clears.
3. Payment must be made within 4 days of auction closing.
4. Total amount due includes the final auction price plus Shipping & Handling.
5. Shipping & Handling will be determined based upon the SHIP TO address.
Shipping
1. Order will be usually shipped out the same or next business days once the payment is made and cleared.
2. Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
3.If you have not received your shipment within 30 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
4.Shipping charges do not include custom & brokerage fees, buyers responsible for all custom and brokerage fees.
Returns
If you send email to us,In our working hours will be resumed within 24 hours.
Please feel free to contact us if you have any questions:
Dear my friend,we appreciate your support.And our goal is service you well and give you a pleasant shopping time in our store.
1.Not receive in time;
2.Item broken;
3.Not satisfied with the item.
we will try our best to handle it well within 24hours,except International Holiday.
Contact Us
We carry the most complete LED replacement bulb collection for any cars, SUVs and trucks. We also provide wide selections of Auto parts
Customer Satisfactory
1.Do not hesitate to contact us any time before and after your purchase, we are committed to your 100% customer satisfaction.
2. We back our commitment with superb service & customer satisfaction guarantee.
3. We are here and ready to assist you with any questions or concerns you might have before or after the purchase.
4. Our goal is to make sure you are a happy customer and pleasant shopping with us.
Feedback
If you have ANY questions with shipping, product or service, please Contact Us first before leaving feedback/write a review or filing a return case. We will solve the problem!If you have ANY questions with shipping, product or service, please Contact Us first before leaving feedback/write a review or filing a return case. We will solve the problem!We always put our customers first and your satisfaction is guaranteed.
Our speed_autolight Tech's are here to serve you. Email us and our expert team will swiftly diagnose the issue and offer the best solution within 12-24 business hours. All off-hours emails will be answered within 24-48 hours.
All rights reserved.