Starter 3270 For Mercury Sable Ford Taurus 1998-1999 Windstar 1996-2003 3.0 3.8L

Description

Specification：
Unit Type: Starter
Voltage: 12
Rotation: CW
Teeth: 10
KW: 1.4
Starter Type: PMGR
Brief: FORD 3.0L 1996-02
MIDDLE HOLE DOWEL PIN BOTTOM HOLE THREADED (M10 X 1.5)
Reference number:
Fine_vehicle
speed beyond imagination
Starter 3270 For Mercury Sable Ford Taurus 1998-1999 Windstar 1996-2003 3.0 3.8L
Specification：
Unit Type: Starter
Voltage: 12
Rotation: CW
Teeth: 10
KW: 1.4
Starter Type: PMGR
Brief: FORD 3.0L 1996-02
MIDDLE HOLE DOWEL PIN BOTTOM HOLE THREADED (M10 X 1.5)
Reference number:
AC DELCO: 336-1194
ARROWHEAD: SFD0037
CARGO: 112586
DELCO REMAN: 10465339, 10465472
FORD: F68U-11000-AA, F68U-11000-AB, F68U-11000-AC, F68U-11000-BA, F68Z-11002-AA, F68Z-11002-BA, F8DU-11000-AA, F8DZ-11002-AA
LESTER: 3270
MOTORCRAFT: SA-832, SA-833, SA-871
NSA: STR-2833
UNIPOINT: STR-2833
WAI: 2-1800-FD
Application：
MAKE
TYPE
MODEL
YEAR
ENGINE
FORD
Auto and Light Truck
TAURUS
1998 - 1999
3.0L(182) V6
FORD
Auto and Light Truck
WINDSTAR
1996 - 2000
3.0L(182) V6
FORD
Auto and Light Truck
WINDSTAR
1996 - 2003
3.8L(232) V6
MERCURY
Auto and Light Truck
SABLE
1998 - 1999
3.0L(182) V6
Package Including:
1 X Starter
​
Fault check:
The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:
1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.
2. The starter thread is loose or off, and the switch or adsorption switch fails.
3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.
4. Excitation coil or armature coil is short-circuited or disconnected.
5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance
In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed
5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting.
How to Install a Car Starter:
There’s never a convenient time for your vehicle’s starter to fail. A car starter's job is to kick over the engine in your car so your vehicle starts.When you find yourself with a vehicle that won’t start, there are a number of a number of issues that may be the culprit,but once you’ve narrowed it down to a faulty starter, you can replace it using just common hand tools.
Part 1: Removing a Bad Starter
(1).Disconnect the battery.
You will not need to remove the positive cable on the battery.
Always disconnect the battery before servicing the electrical system in your vehicle.
(2).Jack up the vehicle if need be.
Ensure you jack the vehicle up on firm, level ground.
(3).Locate the starter.
The smaller cylinder attached to the starter is the starter solenoid.
A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter solenoid.
(4).Disconnect the wiring to the solenoid.
In some cases, it may just be clips you need to disconnect for the wiring.
On some starters, you will need to loosen bolts or screws that hold the wires in place.
(5).Remove the starter retaining bolts then the starter.
Be sure to use the correct size socket, otherwise you risk damaging the bolts.
(6).Compare the new starter to the old one.  Slide the starter into place.
If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle.
New starter solenoids often come with four terminals, but can be used with only two.
Part 2: Installing a New Starter
(7).Insert the starter retainer bolts.
If the bolt does not thread properly, unscrew it and try again.
Make sure the bolts are tight so they can’t vibrate loose while the engine is running.
(8).Connect the wiring to the starter solenoid.
With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.
(9).Reconnect the battery.
With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle.
If the vehicle fails to start with the new starter in place, ensure the battery is fully charged.
(10).Listen to the vehicle as you attempt to start it.
As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.
(11).Ensure the battery terminals are clean and secure.Charge your vehicle’s battery.
A weak connection from the battery can prevent the engine from starting.
Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.
If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.
(12).Check to see the starter solenoid is bad.
If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery.
If the test light does light up, it means the solenoid is good, but the starter itself may have failed.
Frequently Asked Questions:
(1).Why is my car starter burning out?
You likely cranked the starter for too long.
(2).I have to change the starter fairly often in my car. What could be causing this?
A leak of some sort could be fouling the starter if fluid is dripping on it. If that's the case,
replacing the starter doesn't fix the leak so it's only a matter of time before the new starter fails.
(3).What is the black wire connected to?
He black wire can be commonly associated with the wire that connects the battery to the ignition.
If this is not the wire that you are referring to then it could be a random wire that has been detached from your fuse box?
How big is this wire? If it is rather stout then that would be your battery cables. If it is a small wire then it could be several different things.
Follow it and find the origin of the wire, it could be a simple fix just take a look at it.
(4).What does a bad starter sound like?
In my case, there was very little noise when the ignition was turned, and all that was heard was a distinctive click.
One really common sign is if you see any smoke coming from the starter.
(5).If my car is grinding when I turn the key, does that mean I have a bad starter?
No. It's your flywheel. When you start your car the grinding noise would be your flywheel that's connected to the starter.
Item Specifics
Brand
KAC
Fitment Type
Direct Replacement
Interchange Part Number
YF1Z-11002-AA, SR7567X, 6642, SA-887
Manufacturer Part Number
FIN641006
Other Part Number
SA887, YF1U11000AA, YF1Z11002AA, YF1U-11000-AA
Warranty
Lifetime
Placement on Vehicle
Front
Voltage
12V
Starter Type
PMGR
Teeth
10
Rotation
CW
Bundle Listing
Yes
OE#
8788270，YF1Z-11002-AA, SR7567X, 6642, SA-887
UPC
997750641006
Payment
1. We accept payment via PAYPAL only.
2. eCHECK from PayPal will only be processed once the payment clears.
3. Payment must be made within 4 days of auction closing.
4. Total amount due includes the final auction price plus Shipping & Handling.
Shipping
1. Order will be usually shipped out the same or next business days once the payment is made and cleared.
2. Service transit time is provided by the carrier and excludes weekends and holidays.Transit times may vary,particularly
during the holiday season.
3.If you have not received your shipment within 30 days from payment , please contact us. We will track the shipment
and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
4.Shipping charges do not include custom & brokerage fees, buyers responsible for all custom and brokerage fees.
5. Shipping & Handling will be determined based upon the SHIP TO address.
Returns
1.  We only accept refund request for un-opened or un-used item, buyer has to return item in original condition and
retail package within 30 day for refund(item price minus 20% restock fee). The shipping charge is not refundable.
Refund will be processed after we received return.
2. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your
possessionmore than 7 days, it is considered used and we will not issue you a refund or replacement.
3.All returned items must be in the original packaging and you must provide us with the shipping trackingnumber,specific reason for the return, and your eBay ID.
Contact Us
1.Should you have any trouble both before ordering or after you have bought the item, please contact our customer
service support team immediately.
2.Communication is very important and we will try our best to assist all our customers.
3.If you have a problem about your shipment, please email us to resolve your issues before leaving feedback.
Fine_vehicle
speed beyond imagination
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
Window Regulator
Alternator
Starter
Power Steering Pump
helmet
Water Pump
A/C AC Condenser
Radiator
A/C AC Compressor
Headlights
Other
Hot Item
Power Steering Pump w/ Pulley For 07-11 Lexus ES350 Toyota Avalon Camry 96-5498
USD 799.00
For GMC Sierra 1500 2000-2006 Yukon XL 1500 1999-2007 Headlights+Bumper Lamps
USD 75.99
Window Regulator +Motor Rear Left Driver for GMC Chevy Tahoe 2000-2004 2005 2006
USD 60.94
Power Window Regulator w/ Motor for Chevy Silverado GMC Front Right Passenger US
USD 299.00
Front Driver Side Left LH Power Window Regulator w/ Motor For BMW E46 3 Series
USD 48.99
Excellent Delivery
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
New List Item
A/C Compressor For Nissan Maxima Murano 2009-2014 Pathfinder INFINITI QX60 13-15
USD 118.99
A/C Compressor For Volkswagen Beetle Jetta 2006-2014 Rabbit 2006-2009 CO4574JC
USD 120.99
A/C Air Conditioning Compressor For Honda Civic 1.8L 2006-2011 CO 4918AC TRSE07
USD 120.99
Radiator Assembly For Honda HR-V 1.8L 2016-2020 Engine CU13539 Aluminum 1 Row
USD 79.99
KAC Running Boards Side Steps Nerf Bars For 2009-2018 Dodge Ram 1500 Crew Cab US
USD 259.99
Starter 3270 For Mercury Sable Ford Taurus 1998-1999 Windstar 1996-2003 3.0 3.8L
Specification：
Unit Type: Starter
Voltage: 12
Rotation: CW
Teeth: 10
KW: 1.4
Starter Type: PMGR
Brief: FORD 3.0L 1996-02
MIDDLE HOLE DOWEL PIN BOTTOM HOLE THREADED (M10 X 1.5)
Reference number:
AC DELCO: 336-1194
ARROWHEAD: SFD0037
CARGO: 112586
DELCO REMAN: 10465339, 10465472
FORD: F68U-11000-AA, F68U-11000-AB, F68U-11000-AC, F68U-11000-BA, F68Z-11002-AA, F68Z-11002-BA, F8DU-11000-AA, F8DZ-11002-AA
LESTER: 3270
MOTORCRAFT: SA-832, SA-833, SA-871
NSA: STR-2833
UNIPOINT: STR-2833
WAI: 2-1800-FD
Application：
MAKE
TYPE
MODEL
YEAR
ENGINE
FORD
Auto and Light Truck
TAURUS
1998 - 1999
3.0L(182) V6
FORD
Auto and Light Truck
WINDSTAR
1996 - 2000
3.0L(182) V6
FORD
Auto and Light Truck
WINDSTAR
1996 - 2003
3.8L(232) V6
MERCURY
Auto and Light Truck
SABLE
1998 - 1999
3.0L(182) V6
Package Including:
1 X Starter
​
Fault check:
The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:
1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.
2. The starter thread is loose or off, and the switch or adsorption switch fails.
3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.
4. Excitation coil or armature coil is short-circuited or disconnected.
5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance
In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed
5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting.
How to Install a Car Starter:
There’s never a convenient time for your vehicle’s starter to fail. A car starter's job is to kick over the engine in your car so your vehicle starts.When you find yourself with a vehicle that won’t start, there are a number of a number of issues that may be the culprit,but once you’ve narrowed it down to a faulty starter, you can replace it using just common hand tools.
Part 1: Removing a Bad Starter
(1).Disconnect the battery.
You will not need to remove the positive cable on the battery.
Always disconnect the battery before servicing the electrical system in your vehicle.
(2).Jack up the vehicle if need be.
Ensure you jack the vehicle up on firm, level ground.
(3).Locate the starter.
The smaller cylinder attached to the starter is the starter solenoid.
A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter solenoid.
(4).Disconnect the wiring to the solenoid.
In some cases, it may just be clips you need to disconnect for the wiring.
On some starters, you will need to loosen bolts or screws that hold the wires in place.
(5).Remove the starter retaining bolts then the starter.
Be sure to use the correct size socket, otherwise you risk damaging the bolts.
(6).Compare the new starter to the old one.  Slide the starter into place.
If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle.
New starter solenoids often come with four terminals, but can be used with only two.
Part 2: Installing a New Starter
(7).Insert the starter retainer bolts.
If the bolt does not thread properly, unscrew it and try again.
Make sure the bolts are tight so they can’t vibrate loose while the engine is running.
(8).Connect the wiring to the starter solenoid.
With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.
(9).Reconnect the battery.
With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle.
If the vehicle fails to start with the new starter in place, ensure the battery is fully charged.
(10).Listen to the vehicle as you attempt to start it.
As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.
(11).Ensure the battery terminals are clean and secure.Charge your vehicle’s battery.
A weak connection from the battery can prevent the engine from starting.
Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.
If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.
(12).Check to see the starter solenoid is bad.
If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery.
If the test light does light up, it means the solenoid is good, but the starter itself may have failed.
Frequently Asked Questions:
(1).Why is my car starter burning out?
You likely cranked the starter for too long.
(2).I have to change the starter fairly often in my car. What could be causing this?
A leak of some sort could be fouling the starter if fluid is dripping on it. If that's the case,
replacing the starter doesn't fix the leak so it's only a matter of time before the new starter fails.
(3).What is the black wire connected to?
He black wire can be commonly associated with the wire that connects the battery to the ignition.
If this is not the wire that you are referring to then it could be a random wire that has been detached from your fuse box?
How big is this wire? If it is rather stout then that would be your battery cables. If it is a small wire then it could be several different things.
Follow it and find the origin of the wire, it could be a simple fix just take a look at it.
(4).What does a bad starter sound like?
In my case, there was very little noise when the ignition was turned, and all that was heard was a distinctive click.
One really common sign is if you see any smoke coming from the starter.
(5).If my car is grinding when I turn the key, does that mean I have a bad starter?
No. It's your flywheel. When you start your car the grinding noise would be your flywheel that's connected to the starter.
Item Specifics
Brand :
KAC
Fitment Type :
Direct Replacement
Interchange Part Number :
YF1Z-11002-AA, SR7567X, 6642, SA-887
Manufacturer Part Number :
FIN641006
Other Part Number :
SA887, YF1U11000AA, YF1Z11002AA, YF1U-11000-AA
Warranty :
Lifetime
Placement on Vehicle :
Front
Voltage :
12V
Starter Type :
PMGR
Teeth :
10
Rotation :
CW
Bundle Listing :
Yes
OE# :
8788270，YF1Z-11002-AA, SR7567X, 6642, SA-887
UPC :
997750641006
Payment
1. We accept payment via PAYPAL only.
2. eCHECK from PayPal will only be processed once the payment clears.
3. Payment must be made within 4 days of auction closing.
4. Total amount due includes the final auction price plus Shipping & Handling.
Shipping
1. Order will be usually shipped out the same or next business days once the payment is made and cleared.
2. Service transit time is provided by the carrier and excludes weekends and holidays.Transit times may vary,particularly
during the holiday season.
3.If you have not received your shipment within 30 days from payment , please contact us. We will track the shipment
and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
4.Shipping charges do not include custom & brokerage fees, buyers responsible for all custom and brokerage fees.
5. Shipping & Handling will be determined based upon the SHIP TO address.
Returns
1.  We only accept refund request for un-opened or un-used item, buyer has to return item in original condition and
retail package within 30 day for refund(item price minus 20% restock fee). The shipping charge is not refundable.
Refund will be processed after we received return.
2. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your
possessionmore than 7 days, it is considered used and we will not issue you a refund or replacement.
3.All returned items must be in the original packaging and you must provide us with the shipping trackingnumber,specific reason for the return, and your eBay ID.
Contact Us
1.Should you have any trouble both before ordering or after you have bought the item, please contact our customer
service support team immediately.
2.Communication is very important and we will try our best to assist all our customers.
3.If you have a problem about your shipment, please email us to resolve your issues before leaving feedback.
All rights reserved.
On Sep 22, 2022 at 16:56:10 PDT, seller added the following information: