Starter For Honda Accord 2008-2012 CR-V 2007-2011 Element 2009-2011 2.4L 17954

Description

Specification：
√ Brand new and Hight quality √ All of our starters are tested to ensure product performance and durability √ Dual Bolt Pattern fits either 153 or 168 Tooth Flywheel/Flexplates. Allows Starter to be Used with Automatic or Manual Transmissions. √ Straight across Bolt Pattern. √ 3 Horse Power Starter Allows for Superior Performance as Well as the Gear Reduction, Producing up to 50% More cranking Power over Stock Starters. √ 2 Wire Hookup √ 9" Long Allowing Better Clearance
Feature：
Better_megicar
Starter For ACURA TSX Honda Accord 2008-2012 & CR-V 07-11 & Element 09-11 2.4L
Specification：
√ Brand new and Hight quality
√ All of our starters are tested to ensure product performance and durability
√ Dual Bolt Pattern fits either 153 or 168 Tooth Flywheel/Flexplates. Allows Starter to be Used with Automatic or Manual Transmissions.
√ Straight across Bolt Pattern.
√ 3 Horse Power Starter Allows for Superior Performance as Well as the Gear Reduction, Producing up to 50% More cranking Power over Stock Starters.
√ 2 Wire Hookup
√ 9" Long Allowing Better Clearance
Feature：
√ Starter Finish: Black painted
√ Adjustable Mounting Block: Yes
√ Starter Rotation: Standard
√ Maximum Recommended Compression Ratio: 15.1:1
√ Gear Reduction Ratio: 3.73:1
√ Mounting Block Material: Billet aluminum
√ Voltage: 12v
√ Power: 1.4kw
√ Condition: New
√ Rotation: CW
√ Starter Type: PLGR
√ Number of Teeth: 9
√ Gear OD: 0.988in / 25.1mm
√ Mtg Ear 1 Hole: 10.0mm Unthreaded
√ Mtg Ear 2 Hole: 10.0mm Unthreaded
√ Mtg Ear 3 Hole: 10.0mm Unthreaded
√ Flywheel/Flexplate 168-tooth /153-tooth
Application：
ACURA Auto and Light Truck TSX 2009-2014 2.4L
HONDA Auto and Light Truck ACCORD 2008-2012 2.4L
HONDA Auto and Light Truck CR-V 2007-2011 2.4L
HONDA Auto and Light Truck ELEMENT 2009-2011 2.4
Reference number:
ARROWHEAD: SMU0498
HONDA: 31200-R40-A01, 31200-R41-L01, 31200-RZA-A01, RZA5V
LESTER: 19009, 19082
LESTER (OLD): 17954
MITSUBA: SM710-07, SM730-01, SM730-02
Teeth: 9
Voltage: 12
Rotation: CW
Package Includes:
1 x Starter
Fault check:
The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:
1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.
2. The starter thread is loose or off, and the switch or adsorption switch fails.
3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.
4. Excitation coil or armature coil is short-circuited or disconnected.
5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance
In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed
5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting.
How to Install a Car Starter:
There’s never a convenient time for your vehicle’s starter to fail. A car starter's job is to kick over the engine in your car so your vehicle starts.When you find yourself with a vehicle that won’t start, there are a number of a number of issues that may be the culprit,but once you’ve narrowed it down to a faulty starter, you can replace it using just common hand tools.
Part 1: Removing a Bad Starter
(1).Disconnect the battery.
You will not need to remove the positive cable on the battery.
Always disconnect the battery before servicing the electrical system in your vehicle.
(2).Jack up the vehicle if need be.
Ensure you jack the vehicle up on firm, level ground.
(3).Locate the starter.
The smaller cylinder attached to the starter is the starter solenoid.
A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter solenoid.
(4).Disconnect the wiring to the solenoid.
In some cases, it may just be clips you need to disconnect for the wiring.
On some starters, you will need to loosen bolts or screws that hold the wires in place.
(5).Remove the starter retaining bolts then the starter.
Be sure to use the correct size socket, otherwise you risk damaging the bolts.
(6).Compare the new starter to the old one.
Slide the starter into place.
If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle.
New starter solenoids often come with four terminals, but can be used with only two.
Part 2: Installing a New Starter
(7).Insert the starter retainer bolts.
If the bolt does not thread properly, unscrew it and try again.
Make sure the bolts are tight so they can’t vibrate loose while the engine is running.
(8).Connect the wiring to the starter solenoid.
With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.
(9).Reconnect the battery.
With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle.
If the vehicle fails to start with the new starter in place, ensure the battery is fully charged.
(10).Listen to the vehicle as you attempt to start it.
As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.
(11).Ensure the battery terminals are clean and secure.Charge your vehicle’s battery.
A weak connection from the battery can prevent the engine from starting.
Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.
If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.
(12).Check to see the starter solenoid is bad.
If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery.
If the test light does light up, it means the solenoid is good, but the starter itself may have failed.
Frequently Asked Questions:
(1).Why is my car starter burning out?
You likely cranked the starter for too long.
(2).I have to change the starter fairly often in my car. What could be causing this?
A leak of some sort could be fouling the starter if fluid is dripping on it. If that's the case,
replacing the starter doesn't fix the leak so it's only a matter of time before the new starter fails.
(3).What is the black wire connected to?
He black wire can be commonly associated with the wire that connects the battery to the ignition.
If this is not the wire that you are referring to then it could be a random wire that has been detached from your fuse box?
How big is this wire? If it is rather stout then that would be your battery cables. If it is a small wire then it could be several different things.
Follow it and find the origin of the wire, it could be a simple fix just take a look at it.
(4).What does a bad starter sound like?
In my case, there was very little noise when the ignition was turned, and all that was heard was a distinctive click.
One really common sign is if you see any smoke coming from the starter.
(5).If my car is grinding when I turn the key, does that mean I have a bad starter?
No. It's your flywheel. When you start your car the grinding noise would be your flywheel that's connected to the starter.
Item Specifics
Brand
zoncar
Interchange Part Number
SM710-07,SM730-01,SM730-02,31200-RZA-A01A
Other Part Number
RZA5V,SMU0498,17954,19009,19082A
Reference Part Number
31200-R40-A01,31200-R41-L01
Starter Type
PMGR
Starter Rotation
Clockwise
KW
1.6
Teeth
9
Voltage
12
Warranty
5 Year
Position
Front
Device Type
Direct Replacement
Part
UNIT
Payment
We accept
PayPal payment,PayPal Credit,Credit card or debit card and so on.
Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.
We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution.
Shipping
USA Sales & Support - We are a 100% USA Seller!
We ship 5 Days a week (Mon-Friday) excluding major Holidays.
Tracking Number will be uploaded to eBay and or / Emailed to you typically within 24 hours of  shipment.
International Customers may be subject to customs fees that are out of our control.
International shipments may take longer than the eBay specified time due to country customs.
We only accept Paypal.
Quantity orders are welcome!
Returns
All of our items are backed with a 30-day return policy. We ensure all our items are new and in excellent condition prior to shipping. In case you receive the item that is not to the standards above, please contact us via e-Bay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation
Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
Contact Us
Welcome to our eBay store. As a leading and emerging company in manufacturer and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.
Better_megicar
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
Alternator
Starter
headlgiht
Other
Hot Item
Foldable Large Sun Shade Truck Van Car Windshield Visor UV Block Cover Protector
USD 8.99
24 Lug Nuts 14x2.0 Spline Drive 2" Long Black For Ford F150 Expedition Navigator
USD 34.08
BLACK FIT FOR FORD 2009-2022 F-150 PICKUP 2WD 4WD 2" FRONT LEVELING LIFT KIT
USD 34.41
Alternator For Chrome Mini GM 1 Wire SBC BBC Chevy Race 12180-SE 1987-92
USD 77.91
Front Lower Left & Right Side Control Arm w/Ball Joints for 08 - 13 Nissan Rogue
USD 61.03
Picture
New List Item
New Starter for Toyota Corolla Matrix Pontiac Vibe 1.8L 03 04 05 06 07 08 17841
USD 75.33
New Starter for Honda Accord 1998-2007 OdySSey Pilot & Acura Clmdx Tl SMU0004
USD 64.51
New Starter for Hyundai Accent Kia Rio 1.5L 1.6L 17826
USD 59.39
KAC A/C Condenser For 2014 2015 2016 2017 2018 2019 Nissan Rogue 4423 2.5L 2.0L
USD 58.99
Starter Motor 168T Mini Muscle 4HP For Chevy BBC 454 SBC 350 10" 153T 11" Red
USD 94.99
Help & Info
Starter For ACURA TSX Honda Accord 2008-2012 & CR-V 07-11 & Element 09-11 2.4L
Specification：
√ Brand new and Hight quality
√ All of our starters are tested to ensure product performance and durability
√ Dual Bolt Pattern fits either 153 or 168 Tooth Flywheel/Flexplates. Allows Starter to be Used with Automatic or Manual Transmissions.
√ Straight across Bolt Pattern.
√ 3 Horse Power Starter Allows for Superior Performance as Well as the Gear Reduction, Producing up to 50% More cranking Power over Stock Starters.
√ 2 Wire Hookup
√ 9" Long Allowing Better Clearance
Feature：
√ Starter Finish: Black painted
√ Adjustable Mounting Block: Yes
√ Starter Rotation: Standard
√ Maximum Recommended Compression Ratio: 15.1:1
√ Gear Reduction Ratio: 3.73:1
√ Mounting Block Material: Billet aluminum
√ Voltage: 12v
√ Power: 1.4kw
√ Condition: New
√ Rotation: CW
√ Starter Type: PLGR
√ Number of Teeth: 9
√ Gear OD: 0.988in / 25.1mm
√ Mtg Ear 1 Hole: 10.0mm Unthreaded
√ Mtg Ear 2 Hole: 10.0mm Unthreaded
√ Mtg Ear 3 Hole: 10.0mm Unthreaded
√ Flywheel/Flexplate 168-tooth /153-tooth
Application：
ACURA Auto and Light Truck TSX 2009-2014 2.4L
HONDA Auto and Light Truck ACCORD 2008-2012 2.4L
HONDA Auto and Light Truck CR-V 2007-2011 2.4L
HONDA Auto and Light Truck ELEMENT 2009-2011 2.4
Reference number:
ARROWHEAD: SMU0498
HONDA: 31200-R40-A01, 31200-R41-L01, 31200-RZA-A01, RZA5V
LESTER: 19009, 19082
LESTER (OLD): 17954
MITSUBA: SM710-07, SM730-01, SM730-02
Teeth: 9
Voltage: 12
Rotation: CW
Package Includes:
1 x Starter
Fault check:
The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:
1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.
2. The starter thread is loose or off, and the switch or adsorption switch fails.
3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.
4. Excitation coil or armature coil is short-circuited or disconnected.
5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance
In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed
5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting.
How to Install a Car Starter:
There’s never a convenient time for your vehicle’s starter to fail. A car starter's job is to kick over the engine in your car so your vehicle starts.When you find yourself with a vehicle that won’t start, there are a number of a number of issues that may be the culprit,but once you’ve narrowed it down to a faulty starter, you can replace it using just common hand tools.
Part 1: Removing a Bad Starter
(1).Disconnect the battery.
You will not need to remove the positive cable on the battery.
Always disconnect the battery before servicing the electrical system in your vehicle.
(2).Jack up the vehicle if need be.
Ensure you jack the vehicle up on firm, level ground.
(3).Locate the starter.
The smaller cylinder attached to the starter is the starter solenoid.
A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter solenoid.
(4).Disconnect the wiring to the solenoid.
In some cases, it may just be clips you need to disconnect for the wiring.
On some starters, you will need to loosen bolts or screws that hold the wires in place.
(5).Remove the starter retaining bolts then the starter.
Be sure to use the correct size socket, otherwise you risk damaging the bolts.
(6).Compare the new starter to the old one.
Slide the starter into place.
If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle.
New starter solenoids often come with four terminals, but can be used with only two.
Part 2: Installing a New Starter
(7).Insert the starter retainer bolts.
If the bolt does not thread properly, unscrew it and try again.
Make sure the bolts are tight so they can’t vibrate loose while the engine is running.
(8).Connect the wiring to the starter solenoid.
With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.
(9).Reconnect the battery.
With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle.
If the vehicle fails to start with the new starter in place, ensure the battery is fully charged.
(10).Listen to the vehicle as you attempt to start it.
As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.
(11).Ensure the battery terminals are clean and secure.Charge your vehicle’s battery.
A weak connection from the battery can prevent the engine from starting.
Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.
If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.
(12).Check to see the starter solenoid is bad.
If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery.
If the test light does light up, it means the solenoid is good, but the starter itself may have failed.
Frequently Asked Questions:
(1).Why is my car starter burning out?
You likely cranked the starter for too long.
(2).I have to change the starter fairly often in my car. What could be causing this?
A leak of some sort could be fouling the starter if fluid is dripping on it. If that's the case,
replacing the starter doesn't fix the leak so it's only a matter of time before the new starter fails.
(3).What is the black wire connected to?
He black wire can be commonly associated with the wire that connects the battery to the ignition.
If this is not the wire that you are referring to then it could be a random wire that has been detached from your fuse box?
How big is this wire? If it is rather stout then that would be your battery cables. If it is a small wire then it could be several different things.
Follow it and find the origin of the wire, it could be a simple fix just take a look at it.
(4).What does a bad starter sound like?
In my case, there was very little noise when the ignition was turned, and all that was heard was a distinctive click.
One really common sign is if you see any smoke coming from the starter.
(5).If my car is grinding when I turn the key, does that mean I have a bad starter?
No. It's your flywheel. When you start your car the grinding noise would be your flywheel that's connected to the starter.
Item Specifics
Brand :
zoncar
Interchange Part Number :
SM710-07,SM730-01,SM730-02,31200-RZA-A01A
Other Part Number :
RZA5V,SMU0498,17954,19009,19082A
Reference Part Number :
31200-R40-A01,31200-R41-L01
Starter Type :
PMGR
Starter Rotation :
Clockwise
KW :
1.6
Teeth :
9
Voltage :
12
Warranty :
5 Year
Position :
Front
Device Type :
Direct Replacement
Part :
UNIT
Payment
Shipping
Returns
Contact Us
We accept
PayPal payment,PayPal Credit,Credit card or debit card and so on.
Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.
We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution.
USA Sales & Support - We are a 100% USA Seller!
We ship 5 Days a week (Mon-Friday) excluding major Holidays.
Tracking Number will be uploaded to eBay and or / Emailed to you typically within 24 hours of  shipment.
International Customers may be subject to customs fees that are out of our control.
International shipments may take longer than the eBay specified time due to country customs.
We only accept Paypal.
Quantity orders are welcome!
All of our items are backed with a 30-day return policy. We ensure all our items are new and in excellent condition prior to shipping. In case you receive the item that is not to the standards above, please contact us via e-Bay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation
Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
Welcome to our eBay store. As a leading and emerging company in manufacturer and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.
All rights reserved.
On Sep 22, 2022 at 11:38:11 PDT, seller added the following information: