VEVOR 1.5KW ER11 CNC Water Cooled Spindle Motor+ VFD Clamp Pump Pipe Collet 110V

Description

Document
Product Description
Features & Details
【POWERFUL SPINDLE MOTOR】 - The water cooled spindle motor with upgraded four bearings adopts rust-proof materials and dynamic balance technology to reduce noise, wear and tear during the actual operation. And the one-time molding design features high concentricity & high precision for an excellent performance.
【VARIABLE FREQUENCY DRIVE】 - This VFD driver has a single-phase input and 3 phase output. Control mode: V/F control and vector control. Frequency setting mode: digital setting, analog setting, serial communication setting, PID setting, etc. Various control techniques by both synchronization and non-synchronization dynamically realize fast starting without changing brakes. And the unique control mode attains high torque, high precision, full speed regulation drive, and can adapt to the poor power grid, temperature, humidity, and dust interference ability.
【3.5M HIGH LIFT WATER PUMP】 - The submersible pump comes with a durable shell built with ASB plastic material. Its wear-resistant shaft and magnetic rotor facilitate 3.5 m high lifts and 3500L/H flows. With four powerful rubber suckers, the pump is shock absorption and noise reduction, not easy to fall off.
【ALUMINUM CLAMP MOUNT】 - The clamp of the CNC spindle motor is constructed of high-quality cast aluminum for sturdiness and durability. And the well-finished surface is designed to provide a better smoothness. It is high-efficiency for you to fasten the spindle.
【VERSATILE USE SCENARIOS】 - With ER11 collets, milling drill bits, aviation plugs, the extension cord, and the connecting wire, this VFD CNC spindle motor kit is widely applicable to engraving machine, lathes, mills, car hoists, pumps, conveyors, and many more.
Key Features
Water Cooled Spindle Motor
Unlike other spindle motors, ours use advanced dynamic balancing technology to achieve low noise, low friction, and long service life. Its durable surface, high-speed core, and four bearings significantly improve efficiency as an ideal tool for the engraving machine.
VFD Separate Operation Panel
The variable frequency drive is equipped with full-featured buttons and a detachable panel for quick operation and remote control. Reasonable layout and intuitive digital display increase the convenience of daily use for constant torque loads and variable torque loads.
Multiple
Control Terminals
The VFD inverter is rich in digital and analogy control terminals for versatile control. With 110V single phase input and 110V 3 phase output, the VFD is easy to connect with power and motor. And many preservation ways are adopted to ensure stable and reliable operation.
Submersible Water Pump
The pump has the advantages of high lift, large flow rate, and excellent insulation. It should be wholly immersed in water to operate. We also provide you with water pipes to connect the water pump with the spindle motor effortlessly.
Aluminum Spindle Clamp
The clamp with the finished surface is made of aluminum material, which is lightweight enough for you to install, disassemble, and use easily. After the fixing frame is aligned, you only need to turn the screws to the four corresponding holes to complete the installation.
Complete Accessory Kit
For your convenience, we provide you with 8PCs ER11 collets of different diameters, 20 PCs milling drill bits, aviation plugs, VFD panel keypad extension cord, and connecting wire for use with engraving machines and frequency converters.
1.5KW CNC Spindle Motor Kits
The CNC spindle motor kit comes with a premium spindle motor, variable frequency drive, aluminum spindle clamp for high-temperature resistance, low noise & low friction, and high speed. It is widely applicable to engraving machines for carving materials such as wood, stone, metal, etc.
Powerful Spindle Motor
Variable Frequency Drive
3.5M High Lift Water Pump
Aluminum Clamp Mount
Specifications
Model: 80 x 1.5KW
Spindle Motor
Power: 1.5KW
Voltage: 110V
Frequency: 400 Hz
Speed: 0-24000 RPM
Current: 8A
Collet Chuck: ER11
Cooling: Water Cooled
Accuracy: 0.002" / 0.05 mm
Runout Off: 0.002" / 0.05 mm
Bearings: 4 PCs 6002
Variable Frequency Drive
Power: 1.5 KW
Input Voltage: 110V
Output Voltage: 110V
Input Phase: 1 Phase
Output Phase: 3 Phase
Input Frequency: 50 Hz
Output Frequency: 0-400 Hz
Output Current: 17A
Water Pump
Voltage: 110V
Power: 80W
Flow Rate: 3500 L/H
Pump Lift: 11.48 ft / 3.5 m
Water Pipe
Length: 3.3 ft / 1 m
Spindle Clamp
Diameter: 3.15" / 80 mm
Material: Aluminum
ER11 Collets
Diameter: 1 mm, 2 mm, 3 mm, 3.175 mm, 4 mm, 5 mm, 6 mm, 7 mm
Outer Diameter: 0.45" / 11.5 mm
Height: 0.71" / 18 mm
CNC Router Bits
Shank Diameter: 0.125" / 3.175 mm
Cutting Degree: 10°, 15°, 20°, 30°
Tip: 0.004" / 0.1 mm
Package Content
1 x Water Cooled Spindle Motor
1 x Variable Frequency Drive
1 x Water Pump
1 x Water Pipe
1 x Spindle Clamp
8 x ER11 Collets
1 x Set of Router Bits (20 PCs)
2 x Aviation Plugs
1 x VFD Panel Keypad Extension Cord
1 x Connecting Wire
1 x Manual
SHIPPING
ABOUT US
PAYMENT
RETURNS
CONTACT
WARRANTY
Welcome to our eBay store. As a leading and emerging company in manufacturer and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.
We accept
Pay
pal
payment only.
Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.
We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution.
DELIVERY DAYS: 1-4 DAYS (1-3 DAYS FOR 99% OF US 48 STATES)
24 HOURS SHIPPING OUT
SHIP FROM CA & TX & KY & NJ WAREHOUSE
California Warehouse: City of Industry, CA
Texas
Warehouse
:  Houston, TX
Kentucky
Warehouse
: Hebron, KY
New Jersey
Warehouse
: Perth Amboy, NJ
All of our items are backed with a 30-day return policy. We ensure all our items are new and in excellent condition prior to shipping. In case you receive the item that is not to the standards above, please contact us via e-Bay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation
Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
Email Customer Support:
9:00am-2:00am
PST Sunday-Friday
All emails will be responded to within
12-24 hours
This item comes with 24 months Warranty from the date of customers purchased it. Special circumstances will be listed clearly in the listing.
If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.
Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault.
Replacement products are provided with the same warranty as the returned products.
1.5KW CNC Spindle Motor Kits
The CNC spindle motor kit comes with a premium spindle motor, variable frequency drive, aluminum spindle clamp for high-temperature resistance, low noise & low friction, and high speed. It is widely applicable to engraving machines for carving materials such as wood, stone, metal, etc.
Powerful Spindle Motor
Variable Frequency Drive
3.5M High Lift Water Pump
Aluminum Clamp Mount
Key Features
Water Cooled Spindle Motor
Unlike other spindle motors, ours use advanced dynamic balancing technology to achieve low noise, low friction, and long service life. Its durable surface, high-speed core, and four bearings significantly improve efficiency as an ideal tool for the engraving machine.
VFD Separate Operation Panel
The variable frequency drive is equipped with full-featured buttons and a detachable panel for quick operation and remote control. Reasonable layout and intuitive digital display increase the convenience of daily use for constant torque loads and variable torque loads.
Multiple
Control Terminals
The VFD inverter is rich in digital and analogy control terminals for versatile control. With 110V single phase input and 110V 3 phase output, the VFD is easy to connect with power and motor. And many preservation ways are adopted to ensure stable and reliable operation.
Submersible Water Pump
The pump has the advantages of high lift, large flow rate, and excellent insulation. It should be wholly immersed in water to operate. We also provide you with water pipes to connect the water pump with the spindle motor effortlessly.
Aluminum Spindle Clamp
The clamp with the finished surface is made of aluminum material, which is lightweight enough for you to install, disassemble, and use easily. After the fixing frame is aligned, you only need to turn the screws to the four corresponding holes to complete the installation.
Complete Accessory Kit
For your convenience, we provide you with 8PCs ER11 collets of different diameters, 20 PCs milling drill bits, aviation plugs, VFD panel keypad extension cord, and connecting wire for use with engraving machines and frequency converters.
Specifications
Model: 80 x 1.5KW
Spindle Motor
Power: 1.5KW
Voltage: 110V
Frequency: 400 Hz
Speed: 0-24000 RPM
Current: 8A
Collet Chuck: ER11
Cooling: Water Cooled
Accuracy: 0.002" / 0.05 mm
Runout Off: 0.002" / 0.05 mm
Bearings: 4 PCs 6002
Variable Frequency Drive
Power: 1.5 KW
Input Voltage: 110V
Output Voltage: 110V
Input Phase: 1 Phase
Output Phase: 3 Phase
Input Frequency: 50 Hz
Output Frequency: 0-400 Hz
Output Current: 17A
Water Pump
Voltage: 110V
Power: 80W
Flow Rate: 3500 L/H
Pump Lift: 11.48 ft / 3.5 m
Water Pipe
Length: 3.3 ft / 1 m
Spindle Clamp
Diameter: 3.15" / 80 mm
Material: Aluminum
ER11 Collets
Diameter: 1 mm, 2 mm, 3 mm, 3.175 mm, 4 mm, 5 mm, 6 mm, 7 mm
Outer Diameter: 0.45" / 11.5 mm
Height: 0.71" / 18 mm
CNC Router Bits
Shank Diameter: 0.125" / 3.175 mm
Cutting Degree: 10°, 15°, 20°, 30°
Tip: 0.004" / 0.1 mm
Package Content
1 x Water Cooled Spindle Motor
1 x Variable Frequency Drive
1 x Water Pump
1 x Water Pipe
1 x Spindle Clamp
8 x ER11 Collets
1 x Set of Router Bits (20 PCs)
2 x Aviation Plugs
1 x VFD Panel Keypad Extension Cord
1 x Connecting Wire
1 x Manual
Features & Details
【POWERFUL SPINDLE MOTOR】 - The water cooled spindle motor with upgraded four bearings adopts rust-proof materials and dynamic balance technology to reduce noise, wear and tear during the actual operation. And the one-time molding design features high concentricity & high precision for an excellent performance.
【VARIABLE FREQUENCY DRIVE】 - This VFD driver has a single-phase input and 3 phase output. Control mode: V/F control and vector control. Frequency setting mode: digital setting, analog setting, serial communication setting, PID setting, etc. Various control techniques by both synchronization and non-synchronization dynamically realize fast starting without changing brakes. And the unique control mode attains high torque, high precision, full speed regulation drive, and can adapt to the poor power grid, temperature, humidity, and dust interference ability.
【3.5M HIGH LIFT WATER PUMP】 - The submersible pump comes with a durable shell built with ASB plastic material. Its wear-resistant shaft and magnetic rotor facilitate 3.5 m high lifts and 3500L/H flows. With four powerful rubber suckers, the pump is shock absorption and noise reduction, not easy to fall off.
【ALUMINUM CLAMP MOUNT】 - The clamp of the CNC spindle motor is constructed of high-quality cast aluminum for sturdiness and durability. And the well-finished surface is designed to provide a better smoothness. It is high-efficiency for you to fasten the spindle.
【VERSATILE USE SCENARIOS】 - With ER11 collets, milling drill bits, aviation plugs, the extension cord, and the connecting wire, this VFD CNC spindle motor kit is widely applicable to engraving machine, lathes, mills, car hoists, pumps, conveyors, and many more.
SHIPPING
DELIVERY DAYS: 1-4 DAYS (1-3 DAYS FOR 99% OF US 48 STATES)
24 HOURS SHIPPING OUT
SHIP FROM CA & TX & KY & NJ WAREHOUSE
Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748
Texas
Warehouse
: 300 W Airtex Blvd, Suite 200, Houston, TX 77090
Kentucky
Warehouse
: 2125 Gateway Blvd, Hebron, KY 41048
New Jersey
Warehouse
: 1000 High Street, Perth Amboy, NJ 08861
ABOUT US
Welcome to our eBay store. As a leading and emerging company in manufacturer and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.
PAYMENT
We accept
Pay
pal
payment only.
Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.
We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution.
RETURNS
All of our items are backed with a 30-day return policy. We ensure all our items are new and in excellent condition prior to shipping. In case you receive the item that is not to the standards above, please contact us via e-Bay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation
Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
CONTACT
Email Customer Support:
9:00am-2:00am
PST Sunday-Friday
All emails will be responded to within
12-24 hours
WARRANTY
This item comes with 24 months Warranty from the date of customers purchased it. Special circumstances will be listed clearly in the listing.
If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.
Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault.
Replacement products are provided with the same warranty as the returned products.
On Apr-12-21 at 04:30:36 PDT, seller added the following information: